User guide

AccessPORT Features & Functionality Page 15
Use 'Set Data Log List' in the 'Monitor' sub-menu to set which monitors are logged.
NOTE: The AccessPORT is only capable of datalogging while the ignition is turned to
the “ON” position. The AccessPORT will display an error message if it cannot
communicate with the vehicle.
NOTE: Up to 10 log files can be stored on the AccessPORT. Use AP Manager to
delete unneeded logs. If datalogging is started when there are already 10 log files on
the AccessPORT, the log file with the lowest numerical value will be automatically
overwritten.
NOTE: The 10 log files can be a combined length of 2+ hours long.
Fuel Economy
The AccessPORT can estimate your vehicle's fuel economy. Use the up/down arrows to
select instantaneous, session average, or accumulated average fuel usage.
The session average will display the average fuel economy since the Fuel Economy display
was started. The accumulated average will display the average fuel economy since the usage
data was last reset.
Use 'Reset Fuel Econ.' in the 'Monitor' sub-menu to reset the accumulated average fuel
usage data.
NOTE: The AccessPORT is only capable of displaying fuel economy while the ignition
is turned to the “ON” position. The AccessPORT will display an error mess
Set Rev Warning
Use this function to set the desired RPM value for Shift Light. The Shift Light function is
available while viewing Live Data. While the actual engine RPM exceeds the desired RPM
limit, the AccessPORT screen will flash, indicating an over-rev condition.
Revision 1.078 Nov 21, 2012