User's Manual

NETNode
Phase 1 and 2 Units
NETNode
User Manual
NETNode-V2.3
16-96
DS000034 Unclassified
16. NETNode Specification
RF
Frequency Bands
Power
Power Control
Tuning Steps
2170 to 2500MHz
1W
30dB
125kHz
Modulation
Bandwidth
FEC
Modulation Forward Link
Sensitivity
2.5 or 3 or 3.5 MHz (selectable)
5MHz on unit types 66 and above
1/2
QPSK/16QAM Adaptive
-92 to -98dBm (mode)
Ethernet
Physical
Data Rate
Protocols
100 BaseT
Network Toplogy dependent
(Up to 2.2Mbps capacity in a
2.5MHz system. Up to 3Mbps
capacity in a 3.5MHz system.)
Internal packet compression will
increase the data rate capacity for
some types of packet considerably.
ARP, UDP control, Ping, TFTP
upgrade
IP and ICMP protocols between
the radios
MPEG over IP Encapsulation
(UDP multicast + SAP)
HTTP and RTSP
Audio
Talkback
Input
Output
Protocol
Gain
Microphone with internal power
Headphone
G726-32 8KHz over RTP
Mic, Headphone and mute level
selectable
Video In
(AVI option)
Line Standard
Resolution
Coding Mode
PAL/NTSC
704, 528, 480, 352
MPEG2 or MPEG4