User's Manual

NETNode
Phase 1 and 2 Units
NETNode
User Manual
NETNode-V2.3
18-99
DS000034 Unclassified
18. Safety, Compliance and Approvals
18.1. Safe Operating Procedures
 Ensure that the power supply arrangements are adequate to meet the stated
requirements of each MESH NETNode enclosure.
 Operate within the environmental limits specified for the product.
 Do not subject the indoor equipment to splashing or dripping liquids.
 Only authorized, trained personnel should open the product. There are no functions that
required the User to gain access to the interior of the product.
18.2. EMC / Safety and Radio Approvals
The equipment has been designed to meet and has been tested against the following
harmonized EMC and safety standards:
 EN 301 489-1 & EN 301 489-5
 EN 61000-3-2:2000
 EN 61000-3-3:1995
 EN 55022:1998, Class B for Weatherproof Units
 EN 55022:1998, Class A for Plain box Units
 EN 61000-4-2:1995
 EN 61000-4-3:1996
 EN 61000-4-4:1995
 EN 61000-4-5:1995
 EN 61000-4-6:1996
 EN 61000-4-11:1994
 EN 60950:2000
18.3. CE marking
The CE mark is affixed to all SOLO4 and SOLO2 products, and the CE Declaration of
Conformity, as well as the technical file is available on request.
18.4. FCC
18.4.1. FCC Subpart 15A Rule Section 15.21
CAUTION: The user of an intentional or unintentional radiator shall be aware that changes
or modifications not expressly approved by Cobham could void the user‟s authority to
operate the equipment.