User's Manual

NETNode
Phase 1 and 2 Units
NETNode
User Manual
NETNode-V2.3
2-14
DS000034 Unclassified
To set the IP address via RS232 select the correct PC RS232 port from the tools->network
setting menu.
If the NETNode unit is connected to a network that supports DHCP then leave the DHCP
option box checked. If the network does not support DHCP then a valid static IP address
must be entered and the DHCP box unchecked.
Note: Click „Apply‟ after changing any configuration setting
Select
Ethernet or
RS232
IP address of
any unit on the
Network