User's Manual

NETNode
Phase 1 and 2 Units
NETNode
User Manual
NETNode-V2.3
2-23
DS000034 Unclassified
2.14. Battery / DC Power Considerations
The Phase 1 MESH NETNode units can consume over 2A of current at 12V. Phase 2
NETNodes typically do not exceed 1.5Amps of current consumption at 12V nominal supply
voltage.
They are designed to trip off at 10.5V and reset on at 11.5V. The DC cable supplied as
standard with the MESH node is 5m long to allow a customer to mount the NetNode on a
mast. This suffers about 0.5V drop through the cable.
Therefore 1W MESH nodes need to be connected to a large capacity battery which in
nominally 12V or to a 12V power supply. AC to 12V power supplies are not supplied as
standard with the product.
Users can order a suitable universal AC to 12V power supply from domo as a cost option.
Note: Product code SOL4CLC-PSU is used for the Phase 1 unit
Phase 2 Plain Box Mesh units are supplied with an AC to 12V power block as standard