User's Manual

NETNode
Phase 1 and 2 Units
NETNode
User Manual
NETNode-V2.3
2-30
DS000034 Unclassified
3.5. Connecting a Second IP Device to a NETNode
We have seen how to connect IP devices to the NETNodes using the Amphenol 4-way jack
on the NETNodes labelled IP.
In fact, you can connect a second IP interface to the same NETNode at the same time.
Here‟s how!
On a Phase 1 Unit
You‟ll also need for the second IP device (an IP camera for example) a CA0288-5 cable.
1. Connect the Amphenol 19-way plug (m) from CA0288-5 cable to the Amphenol 19-way
jack (f) on the NETNode labelled CTRL/DATA.
2. Now connect the RJ45 8-way plug (m) to your IP device‟s RJ45 8-way jack (f).
3. Ensure you know the IP address of the IP device you have attached.
On a Phase 2 Robust Unit
You‟ll also need for the second IP device (an IP camera for example) a CA0406 cable.
1. Connect the Amphenol plug (m) from CA0406 cable to the Amphenol jack (f) on the
NETNode labelled CTRL/DATA.
2. Now connect the RJ45 8-way plug (m) to your IP device‟s RJ45 8-way jack (f).
3. Ensure you know the IP address of the IP device you have attached.
On a Phase 2 Plain box Unit
On a Phase 2 Plain box unit simply connect to one of the RJ45 panel mount sockets labelled
1 or 2 on the NETNode unit. It does not matter which socket you use.