User's Manual

NETNode
Phase 1 and 2 Units
NETNode
User Manual
NETNode-V2.3
2-31
DS000034 Unclassified
3.6. Viewing a Network Camera
As an example of using an asset, let‟s try viewing a Network Camera attached to the mesh.
You‟ll need a fully powered mesh system which has completed forming a mesh automatically
and is showing a solid green RF Connected LED on each NETNode.
You‟ll also need an IP network camera attached to one of the NETNodes and a computer
attached to another NETNode. You need to know the IP address of the network camera you
want to view.
The network camera will come with setup software to configure the camera before first
operation. Ensure you have configured you camera.
1. On the computer open your web browser
2. Type in the IP address of the camera in the address bar. (http://10.10.10.30/ for
example).
3. You may be prompted for a username and password, depending on the features of the
connected camera.
4. An image from the camera will be displayed.
5. If your network camera has PTZ capability, you‟ll be able to control it using the software
on the computer.
Note: You will view or listen to most assets in a similar way depending on the device being
used. Each IP device will have its own control software but is usually accessed by using a
web browser.