User's Manual

NETNode
Phase 1 and 2 Units
NETNode
User Manual
NETNode-V2.3
2-38
DS000034 Unclassified
4.2. Status Tab – Spectra Pane
Now let‟s look at the Status tab with the focus on the Spectra pane.
4.2.1. About the Spectra Displays
There are two displays labelled A and B which show the spectra being received on the two
diversity antennas of the NETNode you are attached to.
But, there could be several NETNodes transmitting on the mesh so we need to define
which unit we are looking at.
This is done with the radio buttons on the left side of the spectra display. In our example,
the radio button for Domo Office is selected. This means the two displays are showing
spectra for the Domo Office NETNode transmissions as received on our node‟s two
antennas.
4.2.2. Interference
The last radio button is called interference. When you select this, the displays show the
spectra when none of the NETNodes in the mesh are transmitting. This enables us to look
for interference on the frequency we are planning to use for our mesh.