User's Manual

NETNode
Phase 1 and 2 Units
NETNode
User Manual
NETNode-V2.3
2-49
DS000034 Unclassified
4.4.13. Setting the clock (Phase 2 units only)
The real time clock is used to timestamp the recordings on the external memory card. The
clock may either be set manually or synchronised to a GPS unit connected to any node of the
system. The clock internally runs in UTC time and the user may set the time-zone offset and
daylight saving time. Note the units do not automatically adjust for daylight savings.
4.4.14. Format File System…
There are two flash drives built into each NETNode.
 Internal Flash
 External Memory Card
Note: The External memory card is only available on Phase 2 units
Note: The External memory card slot ONLY support basic 2GB or 4GB SD cards
Flash
Use
Internal Flash
Holds the maps and coordinate files.
External Memory Card
Use for video recording on Phase 2 units