User's Manual
NETNode
Phase 1 and 2 Units
NETNode
User Manual
NETNode-V2.3
2-52
DS000034 Unclassified
4.5. Configuration Tab – Transmitter Pane
Note that there are eight configuration tabs enabling you to have eight completely different
setups stored in the NETNode. We are going to look at just tab one – they are all identical.
In the example above, the green square on tab 1 shows we are working on configuration
number one.
The transmitter pane enables you to change the frequency of a NETNode, set the
transmission bandwidth and adjust the output power level of the NETNode.
4.5.1. Preview and Active Configuration
A configuration can be Active or Previewed. This can be determined by looking at the
Configuration numbers. The active configuration is darker blue than the inactive
configurations. To preview a configuration the user can click the configuration number and
the previewed configuration is then highlighted in Green. A user is able to preview
configurations without activating the configuration. To activate a previewed configuration the
user needs to click the „Apply‟ button.