User's Manual

NETNode

Phase 1 and 2 Units

NETNode

User Manual

NETNode-V2.3

2-55

DS000034 Unclassified

4.7.1. Source Mask

The Source Mask enables the streaming of Video that originates from a network connected

to either one of the two NETNode Ethernet ports or from the internal encoder (if it is fitted).

Here‟s how to configure it:

1. Click the Source Mask Set… button

2. The Streamer Source Mask dialog will open

3. Place a check mark in the check box that is the source to stream down the link.

4. Click OK

In our example we are planning to stream from the composite camera connected to the

internal AVI encoder.

Here are all the possible connections involved:

Source

Front Panel

Label

Connector

(Robust Units)

Connector

(Plain Box)

Eth0

Amphenol

RJ45 (f)

Eth1

CTRL/DATA

Amphenol

RJ45 (f)

Encoder

Internal (if fitted)

Eth0 and Eth1 will be from a network connected to the NETNode. Encoder will ONLY be

valid if the NETNode has the AVI-UP option (internal AV Encoder) fitted.