User's Manual

NETNode
Phase 1 and 2 Units
NETNode
User Manual
NETNode-V2.3
2-59
DS000034 Unclassified
4.8.5. GPS Source
It is possible to connect a GPS receiver to a NETNode. This switch enables you to select the
source for the GPS. There are three choices: None, RS232 Port, RS485 port and
Encoder. None simply turns off the GPS facility.
4.8.5.1. Encoder (V2.1 upwards)
From V2.1 software onwards it is possible to connect the GPS to the Encoder data input port
(if AVI is fitted). This is only possible with the AVI variant of the NETNode. The encoder
encryption must be disabled for this to work.