User's Manual

NETNode
Phase 1 and 2 Units
NETNode
User Manual
NETNode-V2.3
8-83
DS000034 Unclassified
When all nodes have been configured they can all be connected to the common backbone.
You may need to wait unit 1min before the Mesh is accessible.
Note: The Interlink NetNodes must always be linked via the radio interface, as well as
the IP backbone to operate correctly. This ensures the system remains as a single Mesh
Network.
Note: Do not connect a unit on the same Radio Network to the same IP backbone with
its Tunnel Mode set to Off. This will result in loss of functionality. First set the mode to
master or slave and then connect.
Note: All separate Mesh networks connected to the IP network (no matter where) must
have different Mesh ID‟s. Failure to do this will result in loss of functionality.