Specifications

D17XX OEM Integration v0.1
17
www.cobham.com/domo
Domo Limited doing business as Cobham Surveillance
Turning On the System
[Extract taken from the D1705 TP v1.1 and as such, Tera Term figures will refer to this variant]
1. Test Setup
Connect the following cables to the D17XX PCB, as shown in Figure 5.
 Power Cable from external PSU to J2
o Set supply to 12V 1.5A
 CA0364 to J14 (Connect Ethernet cable to CA0364 – not shown)
 CA0001/CA0149 to J12
 If D550 encoder is desired (not shown):
o D55x Custom loom to J4, J9, J11
o CA0186 to J7 on D576
Figure 5: Initial setup cabling
2. Initial Setup
2.1 Setting unit type
Launch a Tera Term window and configure a serial port connection with the settings shown in
Figure 6. Note that the port number will depend on your hardware setup and may well vary from
that shown below.