User manual

98-140012-A User interfaces 21
Chapter 3
Using the EXPLORER 710
3
User interfaces
The following user interfaces are available when using the EXPLORER 710
• Phone
• ISDN
• LAN
• WLAN
• USB (Host)
Enabling or disabling an interface
Overview
By default, only the LAN interface is enabled. However, you can enable or disable each of the
interfaces independently.
To enable or disable interfaces with the display and keypad
To enable or disable an interface, do as follows:
1. In the top of the display, locate the interface you want to enable or disable.
2. Use the arrow keys on the keypad to highlight the interface you want to enable or disable.
3. Press OK to toggle between enable and disable.
The interface is greyed and crossed out when disabled.
Note
It may take some seconds to enable an interface. When the icon is no longer
crossed out, the interface is enabled.
WLAN ISDN LAN Phone/Fax USB