User manual

Chapter 3: Using the EXPLORER 710
98-140012-A Using a phone 28
To connect your smartphone for making calls
For details on initial setup of your smartphone and the EXPLORER 710, see
• The documentation for your handset
• First time SIP setup on page 27.
• Managing IP handsets or smartphones on page 50.
To use your phone to make calls through the EXPLORER 710 using WLAN, do as follows:
1. Start up the EXPLORER 710 terminal.
2. Connect your smartphone to the wireless access
point of the EXPLORER 710.
See To connect to the WLAN interface on page 24.
3. Start your SIP application.
You should now be ready to make and receive calls over
BGAN.
To connect a wired IP handset for making calls
For details on initial setup of your IP handset and the EXPLORER 710, see
• The documentation for your handset
• First time SIP setup on page 27.
• Managing IP handsets or smartphones on page 50.
To connect a wired IP handset, do as follows:
1. Start up the EXPLORER 710 terminal.
2. Connect the LAN cable between the IP handset and the connector LAN #1 on the
EXPLORER 710.
When the IP handset is powered and ready, you should now be able to make and receive calls
over BGAN.
Note
Make sure your IP handset complies with PoE class 2 (7 W).
Note
Make sure PoE is enabled in the terminal. See Configuring the LAN interface on
page 44.