User manual

Chapter 5: Maintenance and troubleshooting
98-140012-A Troubleshooting 65
A LAN connection
cannot be established.
The interface is off in the
EXPLORER 710.
Enable the interface by selecting
the LAN interface icon in the
display, or
by accessing the web interface
and selecting Control panel, and
clicking the icon in the right side
of the LAN field.
The cable is not properly
connected.
Connect the cable.
The cable type or connector
type is not correct.
For information on the correct
type of connector and cable, refer
to LAN interface, 2-port on
page 73.
You have connected to the
ISDN interface.
Connect the cable to the interface
marked LAN#1 or LAN#2.
A WLAN connection
cannot be established
The WLAN interface is
disabled in the
EXPLORER 710
Enable the interface by selecting
the WLAN interface icon in the
display, or
by accessing the web interface
and selecting Control panel, and
clicking the icon in the right side
of the WLAN field.
Your computer or is placed
too far away from the
EXPLORER 710.
Bring the computer closer to the
EXPLORER 710.
Note that the specified maximum
distance is only valid under ideal
conditions.
The USB (Host)
interface does not work.
The interface is off in the
EXPLORER 710.
Enable the interface by selecting
the USB interface icon in the
display, or
by accessing the web interface
and selecting Control panel, and
clicking the icon in the right side
of the USB field.
Problem Possible cause Remedy