User manual

Chapter 2: To get started
98-143082-A To make phone calls over BGAN 16
First time SIP setup
If you do not have the EXPLORER Connect app and it is the first time you connect your phone
to the EXPLORER 510 for making calls, you must first set up the SIP server details in your
phone. For information how, see the user documentation for your phone and for the SIP
application. You may be asked to enter some of the following details:
• SIP server address and port: Default address: 192.168.0.1, Port: 5060
• User name: Local number in EXPLORER 510 (0501 to 0516)
• Password: Default same as user name
• Codec priority: Highest priority codec type: G.711
To make a call
To make a call, dial
00 <country code> <phone number> followed by off-hook key.
Example: To call Cobham SATCOM in Denmark ([phone]),
dial 00 45 39558800
If there was an error establishing the connection, the web interface of the EXPLORER 510
shows an error message.
For details about phone calls with the EXPLORER 510, see Phone calls on page 25.
Note
The user name and password must match the IP handset settings in the
EXPLORER 510. See To manage smartphones on page 42.