User manual

Chapter 4: Configuration
98-143082-A Battery status information 38
Total counters
The total counters show:
• Call session totals shows the total duration (hh:mm:ss) for each call type since the log
was last cleared. It also shows the estimated call charge for each call type (if Call charges
have been entered).
• Data session totals shows totals for each data connection type since the log was last
cleared. For Standard data the totals are shown as amount of data transferred (kB) and for
Streaming connections the totals are shown in duration (hh:mm:ss). It also shows the
estimated charge for each data type (if Call charges have been entered).
You can clear the Total counters under
 (Control Panel) > Advanced > Clear total
counters (requires Administrator password).
Battery status information
To view the status of the battery, do one of the following:
• Click the battery symbol from the icon bar at the top of the page, or
•from the Control panel
, select Battery.
The Battery page shows the charging status (Charging or Not charging), the charge level in
percent and the estimated remaining usage time.
For more information on the EXPLORER 510 batteries, see
• Normal use of the battery on page 70
• To recharge the battery on page 70
• Accurate display of the battery capacity on page 70
Note
The estimated remaining usage time can vary significantly, depending on usage. The
remaining time will be shorter if the terminal is used a heavily (more interfaces in use
and more calls and data sessions active).