Specifications

Setting Dynamike®
This controls the microphone sensitivity
(outgoing audio level).
To Transmit
21
To Transmit Transmit
20
Setting
Dynamike
®
Caution!
Be sure the antenna is properly
connected to the radio before
transmitting. Prolonged
transmitting without an
antenna, or a poorly matched
antenna, could cause damage
to the transmitter.
Be sure to read the F.C.C.
Rules and Regulations before
transmitting.
Operation
Operation
1
Select desired channel.
1
CH19
NOR
Initially, set fully clockwise so that maximum
voice volume is available. Dynamike® may have
to be reduced in some conditions.
CH19
NOR
Transmit
Push and hold the mic button to transmit. The
transmitter is now activated. When transmitting,
hold the microphone two inches from your
mouth and speak in a clear, normal voice. Release
to receive.
1
AW-1210038-1B_29LTD_CLASSIC_MANL_REV_022021.indd 20-21AW-1210038-1B_29LTD_CLASSIC_MANL_REV_022021.indd 20-21 2/24/21 2:54 PM2/24/21 2:54 PM