Specifications

Temporary Mobile Set-Up
27
Base Station
Operation
(From 120V AC
House Current)
Temporary
Mobile Set-Up
Temporary Mobile Operation
For temporary mobile operation you may want to
purchase an optional automobile power adapter.
This adapter and a magnetic mount antenna
allow you to quickly “install” your transceiver for
temporary use.
Base Station Operation
(From 120V AC House Current)
To operate the transceiver from your home or
office you will need a 13.8 Volt DC Power Supply
rated at a minimum of 2 amps and a properly
installed base station antenna.
Home And Office Set-Up
26
Warning!
Do not attempt to operate this
transceiver by connecting it
directly to 120V AC.
1
Connect a properly installed and matched
base station antenna.
Simply connect the red (+) and black (-)
leads of the transceiver to the corresponding
terminals of the power pack.
Plug the power cable into the jack marked
“Power” on the back of the unit. Be sure to
observe polarity markings.
2
3
AW-1210038-1B_29LTD_CLASSIC_MANL_REV_022021.indd 26-27AW-1210038-1B_29LTD_CLASSIC_MANL_REV_022021.indd 26-27 2/24/21 2:54 PM2/24/21 2:54 PM