Specifications

Temporary Mobile Set-Up
25
Base Station
Operation
(From 120V AC
House Current)
Temporary
Mobile Set-Up
Temporary Mobile Operation
For temporary mobile operation you may want
to purchase an optional cigarette lighter adapter
from your COBRA® dealer. This adapter and a
magnetic mount antenna allow you to quickly
“install” your transceiver for temporary use.
ANT
PA.SP. EXT.SP.
+ POWER –
Base Station Operation
(From 120V AC House Current)
To operate your transceiver from home or office
you will need a 13.8 volt DC Power Supply rated
at a minimum of 2 amps, and a properly installed
base station antenna.
Home And Office Set-Up
24
Warning!
Do not attempt to operate this
transceiver by connecting it
directly to 120 vac.
1
Connect properly installed and matched base
station antenna.
Simply connect the red (+) and black (-)
leads of the transceiver to the corresponding
terminals of the power supply.
Plug power cable into back of unit marked
“Power”. Be sure to observe polarity markings.
2
3
ANT
PA.SP. EXT.SP.
+ POWER –
AW-1210041-1B_29NWLTD_CLASSIC_MANL REV_022021.indd 24-25AW-1210041-1B_29NWLTD_CLASSIC_MANL REV_022021.indd 24-25 2/24/21 2:57 PM2/24/21 2:57 PM