Specifications

Installation
Installation
Location
32
Mounting and
Connection
Mounting and Connection
Hold the radio with the mounting bracket
in the exact desired location. If there is no
interference, remove the bracket and use it
as a template to mark the location for the
mounting screws.
Location
Plan location of transceiver and microphone
bracket before starting the installation.
Select a location that is convenient for operation,
yet does not interfere with the driver or passenger.
The transceiver is usually mounted to the
underside of the dash with the microphone
bracket beside it.
Note
The transceiver is held in the
universal mounting bracket
by two thumbscrews which
allow for adjustment at a
convenient angle.
The bracket includes two
self-tapping screws and star
washers. The mounting
must be mechanically strong,
conveniently located.
continued
Drill the holes and secure the bracket.
2
1
Connect the antenna cable plug to the
receptacle marked “ANT” on the back
of the unit.
3
ANT
PA.SP. EXT.SP.
+ POWER –
AW-1210041-1B_29NWLTD_CLASSIC_MANL REV_022021.indd 2-3AW-1210041-1B_29NWLTD_CLASSIC_MANL REV_022021.indd 2-3 2/24/21 2:57 PM2/24/21 2:57 PM