Specifications

While holding mic
button adjust the
SWR CAL knob so the
meter needle swings
to the CAL t mark on
the meter (located on the right).
Operation
Operation
Calibrate For
SWR (Standing
Wave Ratio)
1110
continued
Note
Calibration must be made in an
open area (never in a garage).
Vehicle doors must be closed.
No one should be standing near
the antenna. (See your antenna
directions for more complete
information).
Push and hold mic button.
Switch to the CAL position.
2
1
3
Calibrate for SWR (Standing Wave Ratio)
SWR calibration is required to accurately measure
SWR on the built in meter. We suggest performing
this calibration procedure before placing the meter
function switch into the SWR position and anytime
the antenna or coax cable is replaced to confirm
antenna system performance.
DYNAMIKE
RFGAIN
S/RF
SWR
CAL
NB/
ANL
ANL
OFF
CB
PA
MIN MAX MIN MAXOFF
VOL SQL
SIG1 3579 +30dB
23 CAL
SWR
RF
29 NW LT
D
PUSH &
HOLD
Select channel 20.
4
DYNAMIKE
RFGAIN
SWR CAL
S/RF
SWR
CAL
NB/
ANL
ANL
OFF
CB
PA
CH19
CH9
NOR
MIN MAX
MIN MAX
OFF
VOL SQL
SIG1 3579 +30dB
23 CAL
SWR
DIMMER
HI
NOR
MIN MAX
RX/TX ANT
29 NW LTD CLASSIC
TONE
SIG1 3579 +30dB
23 CAL
SWR
RF
SIG1 3579 +30dB
23 CALSWR
RF
Note
Antenna Indicator LED
will illuminate when TX if
SWR is high.
AW-1210041-1B_29NWLTD_CLASSIC_MANL REV_022021.indd 10-11AW-1210041-1B_29NWLTD_CLASSIC_MANL REV_022021.indd 10-11 2/24/21 2:57 PM2/24/21 2:57 PM