Specifications

When switched to ANL the Automatic Noise
Limiter is activated. This helps reduce noise
created by the vehicle’s electronics.
When switched to NB/ANL position the
RF Noise Blanker is also activated, providing
increased noise filtration.
When switched to OFF position all noise
filtration will be turned off.
Operation
Operation
1514
NB-ANL/ANL/
OFF (Noise
Blanker /
Automatic Noise
Limiter) Switch
RF Gain Control
Tone Hi/Nor
RF Gain Control
The RF Gain is used to optimize reception in
strong or weak signal areas.
Tone Hi/Nor
This switch is used to shape the Audio Frequency
Response to the operators preference.
Note
The RF Gain is used to optimize
reception in weak signal areas.
Note
The RF noise blanker is very
effective in reducing impulse
noises such as ignition
interference.
DYNAMIKE
RFGAIN
S/RF
SWR
CAL
NB/
ANL
ANL
OFF
CB
PA
MIN MAX MIN MAXOFF
VOL SQL
SIG1 3579 +30dB
23 CAL
SWR
RF
29 NW LT
D
When set in HI the treble is increased.
IN
SWR CAL
B
A
CH19
CH9
NOR
MAX
DIMMER
HI
NOR
MINMAX
ANTRX/TX
9
NW LTD CLASSIC
TONE
Rotate the RF Gain knob counterclockwise
to reduce gain in strong signal areas. In weak
signal areas turn clockwise to increase gain.
DYNAMIKE
RFGAIN
SWR CAL
S/RF
SWR
CAL
NB/
ANL
ANL
OFF
CB
PA
CH19
CH9
NOR
MIN MAX MIN MAXOFF
VOL SQL
SIG1 3579 +30dB
23 CAL
SWR
DIMMER
HI
NOR
MIN
MAX
RX/TX ANT
29 NW LTD CLASSIC
TONE
1
NB-ANL/ANL/OFF (Noise Blanker/Automatic
Noise Limiter) Switch
1
1
AW-1210041-1B_29NWLTD_CLASSIC_MANL REV_022021.indd 14-15AW-1210041-1B_29NWLTD_CLASSIC_MANL REV_022021.indd 14-15 2/24/21 2:57 PM2/24/21 2:57 PM