User's Manual

1716
Operation Operation
To Transmit
To Transmit
LCD Display
Press the Press-To-Talk
(PTT) key.
1
Release the PTT
button and you will
automatically be in the
receive mode again.
4
The TX icon will appear.
Hold the microphone about 2 inches from
your mouth and speak in a normal voice.
3
LCD Display
Your Cobra 75 WX ST CB is designed with a
liquid crystal display that indicates channel
number,or frequency and the operating mode.
2 digit channel display / 5 digit fre q u e n cy display
= Memory Indicator/Number
= Scan Indicator
= Dual Watch Indicator
= Lock Key Indicator
= Emergency Channel 9
= Function key indicator
= Amplitude Modulation
= Weather Station
= Receive Indicator
= SoundTracker indicator
= Transmit Indicator
Signal Strength Meter
TX
ST
RX
W X
A M
E M G
LO C K
DW
SCAN
M
F
To Receive
Your 75 WX ST is automatically in the receive
mode and is illuminated.
RX
1
2
To Receive
Note
To avoid damaging the LCD
display,do not subject your CB
radio to extreme temperatures
(below -5°F or above 140°F) for
extended periods of time.
Caution!
Be sure the antenna is properly
connected to the radio before
transmitting.Prolonged trans-
mitting without an antenna,
or a poorly matched antenna,
could cause damage to the
transmitter.
Be sure to read the F.C.C. Rules
and Regulations included with
this unit before transmitting.
75 WX ST Manual(5188) 2/5/01 3:00 PM Page 16