XRS_R7_R9G_Final_012507.
XRS_R7_R9G_Final_012507.qxd:Layout 1 Introduction 1/25/07 4:30 PM Page A1 Important Information and Customer Assistance Important Information • Safe Driving Motorists are expected to exercise all due caution while using this product, and to obey all applicable traffic laws. Do not attempt to change settings of the unit while the car is in motion. Federal Laws Governing the Use of Radar Detectors It is not against federal law to receive radar transmissions with your Cobra® radar/laser detector.
XRS_R7_R9G_Final_012507.qxd:Layout 1 Introduction 1/25/07 4:30 PM Page A2 Controls, Indicators and Connections The XRS R7 provides detection capabilities for radar, laser and strobe signals. The XRS R9G has all the features of the XRS R7 plus a GPSL module which provides alerts when approaching photo-enforced intersections and roads with fixed red light/speed cameras. The XRS R9G can store up to 1,000 additional user-programmable Location Alerts.
XRS_R7_R9G_Final_012507.
XRS_R7_R9G_Final_012507.qxd:Layout 1 Introduction 1/25/07 4:30 PM Page 1 Contents Introduction Important Information . . . . . . . . . .A1 Customer Assistance . . . . . . . . . . .A1 Controls, Indicators and Connections . . . . . . . . . . . . . . . .A2 In This Package . . . . . . . . . . . . . . .A3 Product Overview . . . . . . . . . . . . . . .2 Installation Overview . . . . . . . . . . . .4 Your Detector Installation . . . . . . . . . . . . . . . . . . . .7 Controls and Display . . . . . . . . . .
XRS_R7_R9G_Final_012507.qxd:Layout 1 Introduction 1/25/07 4:30 PM Page 2 Product Overview Cobra XRS R7 and XRS R9G • WARNING Modifications or parts not approved by Cobra Electronics Corporation may violate FCC Rules and void authority to operate this equipment. Read and understand the information in the Installation Overview and Installation sections of this manual for best operation. The XRS R7 consists of a Main Detector Unit (MDU) and a wireless Remote Display Unit (RDU).
XRS_R7_R9G_Final_012507.qxd:Layout 1 Introduction 1/25/07 4:30 PM Page 3 Product Overview Remote Display Unit (RDU) The RDU is a wireless remote controller/display module that shows alerts detected by the MDU. The RDU display uses an Extreme Bright DataGrafix™ (Organic Light Emitting Diode) Display to show large graphical alerts as signals are detected.
XRS_R7_R9G_Final_012507.qxd:Layout 1 1/25/07 4:30 PM Page 4 Installation Overview Introduction Mount Unit Main Detector Unit (MDU) Note: To power the MDU, use one of the two power cords provided (See Page A3). • 12V Power Cord with In-line Fuse for Hardwired Installation: For connection to vehicle’s fuse box or battery, or • 12V Power Cord with In-line Fuse and Cigarette Lighter Plug: For connection to 12-volt vehicle accessory outlet (cigarette lighter plug). Fuse box hard wiring is recommended.
XRS_R7_R9G_Final_012507.qxd:Layout 1 Introduction 1/25/07 4:30 PM Page 5 Installation Overview Figure B Figure C Mount the MDU high on windshield to right of rear view mirror (Figure B). The MDU must have a clear view through the windshield, be parallel to the road (Figure C) and have clearance to snap into the “up” position. Position the MDU for easy access to power switch, cable connections and for mirror movement. Mount the MDU on the windshield close to the headliner. (See page 7 for details.
XRS_R7_R9G_Final_012507.qxd:Layout 1 Introduction 1/25/07 4:30 PM Page 6 Installation Overview Global Positioning System Locator (GPSL) - (XRS R9G Model Only) Figure E Internal View Mount GPSL module close enough to the MDU for supplied cable to connect both modules (Figure E). Mount GPSL with proper side (“This Surface Toward Sky” wording embossed in unit case) attached to windshield and exposed to the sky.
XRS_R7_R9G_Final_012507.qxd:Layout 1 Your Detector 1/25/07 4:30 PM Page 7 Installation Main Detector Unit (MDU) 1. Position MDU before actual mount. • Do not attempt to adjust MDU bracket. • Hold unit in place. • Using non-permanent pen, mark two opposite corners. 2. Peel off film from two-piece fastener strips. Align with two corner markings made in step 1. Press MDU bracket against windshield. • Fastener strips cannot easily be removed. Strength of adhesive strips increases with time.
XRS_R7_R9G_Final_012507.qxd:Layout 1 Your Detector 1/25/07 4:30 PM Page 8 Installation 1. Loosen MDU (gray) bracket Not In Use. adjust knob. Stored/Concealed Position. 1 Bracket Adjust Knob 2. Adjust module to a position parallel to the road. Lower to Operating Detection Position. Loosen 2 3 3. Tighten knob to set proper horizontal detection position.
XRS_R7_R9G_Final_012507.qxd:Layout 1 Your Detector 1/25/07 4:30 PM Page 9 Installation 4. Attach power cord to MDU. Use power cord clips to route to fuse box or lighter/accessory outlet, depending on the selected power cord. Surfaces must be clean and free of dirt, oil and dust. Plug in the power cord.
XRS_R7_R9G_Final_012507.qxd:Layout 1 Your Detector 1/25/07 4:30 PM Page 10 Installation Remote Display Unit (RDU) Battery Installation 1. Turn RDU over and slide battery cover off of RDU body. 2. Carefully plug battery wire connector into the battery connection port in RDU. Connector only fits one way. 3. Replace battery cover. Battery Charging The unit is shipped with a sealed lithium-ion (LiON) battery pack that is rechargeable.
XRS_R7_R9G_Final_012507.qxd:Layout 1 Your Detector 1/25/07 4:30 PM Page 11 Installation 1. Attach 12V to 5V retractable USB power cable to bottom of RDU and to 12V power adapter. 2. Connect 12V power adapter to vehicle accessory outlet (cigarette lighter plug). 3. Initial charge for battery is two (2) hours. (RDU may be used while charging.) WARNING This lithium-ion (LiON) battery should only be recharged inside the RDU.
XRS_R7_R9G_Final_012507.qxd:Layout 1 Your Detector 1/25/07 4:30 PM Page 12 Installation RDU Holster A holster is provided to allow you to position the RDU for best driver visibility and access while charging the battery. A vent or visor clip will attach to the rear of the holster. Self-adhesive hook and loop strips are also included for alternative mounting locations.
XRS_R7_R9G_Final_012507.qxd:Layout 1 Your Detector 1/25/07 4:30 PM Page 13 Installation Global Positioning System Locator (GPSL) (XRS Model R9G Only) • 1. Position GPSL before actual mount. • Hold GPSL unit in place with USB cable connected to MDU. • Using non-permanent pen, mark two opposite corners. IS CE TH FA DS R R U A S W Y K TO S 2. Peel off film from two-piece fastener strips. Align with two corner markings made in step 1. Press GPSL bracket against windshield.
XRS_R7_R9G_Final_012507.qxd:Layout 1 Your Detector 1/25/07 4:30 PM Page 14 Installation GPSL Initial Satellite Lock The GPSL module now needs to detect the Global Positioning satellites. 1. With vehicle running and parked in an area clear of obstructions to the sky, turn on the power to the MDU with GPSL connected. 2. Keep the MDU turned on for at least 15 minutes. This will allow fast satellite acquisition in subsequent power-ups.
XRS_R7_R9G_Final_012507.qxd:Layout 1 Your Detector 1/25/07 4:31 PM Page 15 Controls and Display RDU Controls MUTE/ Button Press for Standby Status Screens. Mutes an alert. Selects features in Menu mode. DIM/ Button Press for display brightness. Navigates Menu Screens. Adjusts volume DOWN in Volume mode. MENU/SAVE Button Press to enter Menu screen. Press and hold to save User Location (XRS R9G only). CITY/ Button Toggle between Highway and City modes. Navigates Menu Screens.
XRS_R7_R9G_Final_012507.qxd:Layout 1 Your Detector 1/25/07 4:31 PM Page 16 Controls and Display RDU Display Standby Screen The IntelliMute (I-Mute) symbol shows only if the feature is activated. Symbol changes to indicate if above or below Set-point when IntelliMute is turned on. (Refer to page 24.) The RDU link indicators show the the MDU is connected to the RDU by the wireless link. The indicator changes to show a lost connection.
XRS_R7_R9G_Final_012507.qxd:Layout 1 Your Detector 1/25/07 4:31 PM Page 17 Getting Started Power On/Off • 1. Press power button on RDU. 2. Unit cycles through power on/self test. Displays Standby screen when process completed. 3. Display changes to Auto Dark operating screen after 30 seconds (factory default). 4. Press, hold power button on RDU for more than two seconds to turn off unit.
XRS_R7_R9G_Final_012507.qxd:Layout 1 1/25/07 4:31 PM Page 18 Getting Started Your Detector Standby Screens Press Mute/ while the Standby screen is displayed to cycle through different Standby screens. The Standby screens will be displayed in the following order: Main Standby Screen RDU Battery I-Mute City/Hwy Mode Car Voltage Latitude/ Longitude Speed Compass Compass, Speed and Latitude/Longitude screens only display if GPSL is connected to system.
XRS_R7_R9G_Final_012507.qxd:Layout 1 Your Detector 1/25/07 4:31 PM Page 19 Getting Started Screens display only if GPSL is connected. Compass Compass Indicates driving direction. NW Speed Speed 55 Shows speed of vehicle (may be changed to km/h in Menu). mph Lat / Lon 41º54'53"N 87º47'22"W Lat/Lon Displays latitude and longitude of present location.
XRS_R7_R9G_Final_012507.qxd:Layout 1 Your Detector 1/25/07 4:31 PM Page 20 Getting Started Auto Dark When Auto Dark screen is engaged, a small dot displays at bottom of screen to show that power is on. Touch any button to recall Standby screen. Highway/City Mode IntelliShield® Tri-level City mode has a Highway mode and three City mode levels: City X, City X Beep Off and City X+K. • • IntelliShield® Tri-Level City Mode Toggle from Highway to City mode for three levels of Audio Alert suppression.
XRS_R7_R9G_Final_012507.qxd:Layout 1 1/25/07 4:31 PM Page 21 EasySet Programming Your Detector Programming Overview • Begin all programming or setup with MENU/SAVE button. Select this to change USER or ALERT settings. USER settings customize how system handles alert filtering, audio-related options, visual options and system-related options. ALERT settings determine which ALERT types are activated. ALERT settings on the XRS R9G model include GPS-related features.
XRS_R7_R9G_Final_012507.qxd:Layout 1 Your Detector 1/25/07 4:31 PM Page 22 Program Navigation Program Flow Diagrams User Settings Diagram • Screens display in the following order when cycling through User Settings menu. Speed Units screen displays only if GPSL is connected to system. Pair RDU screen displays only if system detects a missing RDU connection. User Settings City Default Pair Remote NOTE: Only shown if RDU lock is lost.
XRS_R7_R9G_Final_012507.qxd:Layout 1 Your Detector 1/25/07 4:31 PM Page 23 Program Navigation Alert Settings Diagram Screens display in the following order when cycling through Alert Settings menu. Speed Alert, Display GPS Database Version and Delete ALL User Locations screens display only if a GPSL is connected to system.
XRS_R7_R9G_Final_012507.qxd:Layout 1 Your Detector 1/25/07 4:31 PM Page 24 Settings Programming User Settings IntelliMute® Mode • Set IntelliMute to mute alerts when vehicle is stopped or moving slowly. Intellimute senses engine RPMs and mutes alerts. IntelliMute does not mute strobe signals from emergency vehicles. IntelliMute works with City and Auto Mute modes. Set an RPM activation point to start IntelliMute. IntelliMute begins muting alerts when engine RPMs fall below set RPMs.
XRS_R7_R9G_Final_012507.qxd:Layout 1 Your Detector 1/25/07 4:31 PM Page 25 Settings Setting IntelliMute From the IntelliMute Setup screen: 1. Press MUTE/ button to start setup. 2. Press and hold the vehicle accelerator at desired engine RPMs. 3. Press DIM/ button to complete setting process. System stores engine RPM setting and displays a completion message and a tone or voice message.
XRS_R7_R9G_Final_012507.qxd:Layout 1 Your Detector 1/25/07 4:31 PM Page 26 Settings Display Setup Display Setup determines how long RDU button backlight and display stays on before RDU screen switches to Auto Dark mode. Set RDU display time for 15 seconds, 30 seconds, one minute, three minutes or Always On. Factory default is 30 seconds. NOTE: If selecting “Always On” setting, RDU battery will need charging more frequently.
XRS_R7_R9G_Final_012507.qxd:Layout 1 Your Detector 1/25/07 4:31 PM Page 27 Settings Programming Alert Settings POP Alert • With Pop Detect mode on, signals are detected and an alert given. During alert unit continues to detect other signals. Factory setting is Pop Detect Off. X Band Alert With X Band Detect mode on, signals are detected and an alert given. During alert unit continues to detect other signals. Factory setting is X Band Detection On.
XRS_R7_R9G_Final_012507.qxd:Layout 1 Your Detector 1/25/07 4:31 PM Page 28 Settings Spectre 1 Audio Mode Spectre 1 Audio mode is only available if Spectre 1 Alert is on. Alerts are audio and displayed on screen. Safety Alert radar signals are detected and alerts given when Safety Alert mode is on. Factory setting is Spectre 1 Audio Off. Safety Alert When Safety Alert mode is On, Safety Alert radar signals are detected and an alert is given. During alert unit continues to detect other signals.
XRS_R7_R9G_Final_012507.qxd:Layout 1 Your Detector 1/25/07 4:31 PM Page 29 Detection Alerts Detection Alerts Alert Screens • All alerts have a unique tone and a vocal alert if the Voice Alert feature is activated. Radar Alerts RADAR RADAR X1 Ku1 RADAR K1 RADAR Ka1 Radar alerts for X band, Ku band, K band and Ka band generate a screen display “RADAR,” signal type and a number (1-5) indicating the signal strength.
XRS_R7_R9G_Final_012507.qxd:Layout 1 Your Detector 1/25/07 4:31 PM Page 30 Detection Alerts Emergency Vehicle Alerts EMERGENCY EV Emergency vehicle alerts are indicated by “EV” and the label “EMERGENCY.” Road Hazard Alerts ROAD HAZARD Road Hazard alerts show “RH” and “ROAD HAZARD.” RH Railroad Alerts RAILROAD Railroad alerts generate “RR” and “RAILROAD.” RR Low Car Voltage Alert WARNING CAR VOLTAGE LOW 30 English The detector emits a car battery low alert when voltage drops below 11.9 volts.
XRS_R7_R9G_Final_012507.qxd:Layout 1 Your Detector 1/25/07 4:31 PM Page 31 Detection Alerts The following screens are shown only if a Global Positioning System Locator (GPSL) is connected to the system. A detector system with a GPSL also receives alerts based on vehicle location and information in its databases. Photo Enforcement Alerts An alert to a Photo Enforcement area is indicated by a camera surrounded by a circle.
XRS_R7_R9G_Final_012507.qxd:Layout 1 Your Detector 1/25/07 4:31 PM Page 32 Radar and Laser Understanding Radar and Laser Radar Speed Monitoring Systems • Four band frequencies have been approved by the Federal Communications Commission (FCC) for use by speed monitoring radar equipment: X band K band Ka band Ku band 10.525 GHz 24.150 GHz 33.400 – 36.000 GHz 13.435 GHz Your detector detects signals in all four radar bands.
XRS_R7_R9G_Final_012507.qxd:Layout 1 Your Detector 1/25/07 4:31 PM Page 33 Radar and Laser Strobe Alert Special strobes mounted on the light bars of authorized emergency vehicles (fire trucks, police cars, ambulances) automatically change traffic signals as the vehicle approaches an intersection. These strobes and the special strobe detectors located on the traffic signals are already in use in more than 1000 cities nationwide.
XRS_R7_R9G_Final_012507.qxd:Layout 1 Your Detector 1/25/07 4:31 PM Page 34 Radar and Laser Pop Radar Guns The Pop Mode Radar Gun is a single-pulse Doppler radar that is a feature of a K and Ka (Bee III Ka radar gun) band Instant-On radar gun. It uses a single, short-time pulse to measure the target vehicle’s speed. The Pop mode receiver senses Pop signals beyond the effective range of Pop radar guns.
XRS_R7_R9G_Final_012507.qxd:Layout 1 Your Detector 1/25/07 4:31 PM Page 35 Maintenance Maintenance Detector is designed and built to give years of trouble-free performance without service. No routine maintenance is required. • Follow these steps if unit is not operating properly: I Make sure power cord is properly connected. I Make sure lighter/accessory outlet of vehicle is clean and free of corrosion. I Make sure power cord’s accessory adapter is firmly seated in lighter/accessory outlet.
XRS_R7_R9G_Final_012507.qxd:Layout 1 Your Detector 1/25/07 4:31 PM Page 36 Specifications Band and Frequencies • Band Frequencies X Band 10.525 ± 0.050 GHz K Band 24.125 ± 0.125 GHz Safety Alert Traffic Warning System 24.070 ± 0.010 GHz 24.110 ± 0.010 GHz 24.190 ± 0.010 GHz 24.230 ± 0.010 GHz Ka Band 34.700 ± 1.300 GHz Ku Band 13.435 ± 0.050 GHz Laser 910 ± 50 nm Strobe 700 ± 300 nm This radar detector is covered by one or more of the following U.S.
XRS_R7_R9G_Final_012507.qxd:Layout 1 Warranty 1/25/07 4:31 PM Page 37 Warranty Warranty COBRA ELECTRONICS CORPORATION warrants that its products, and the component parts thereof, will be free of defects in workmanship and materials for a term of one year from the date of first consumer purchase. This warranty may be enforced by the first consumer purchaser, provided that the product is used solely within the U.S.A and Canada.
XRS_R7_R9G_Final_012507.qxd:Layout 1 Warranty 1/25/07 4:31 PM Page 38 Warranty All implied warranties, including warranties of merchantability and fitness for a particular purpose are limited in duration to the length of this warranty. COBRA SHALL NOT BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL OR OTHER DAMAGES; INCLUDING, WITHOUT LIMITATION, DAMAGES RESULTING FROM LOSS OF USE OR COST OF INSTALLATION.
XRS_R7_R9G_Final_012507.qxd:Layout 1 User License 1/25/07 4:31 PM Page 39 User License User License • This document and the software and data described in it are furnished under license and may be used or copied only in accordance with such license. Except as permitted by such license, the contents of this document, software and data may not be disclosed to third parties, copied or duplicated in any form, in whole or in part, without the prior written permission of Cobra Electronics Corporation.
XRS_R7_R9G_Final_012507.qxd:Layout 1 User License 1/25/07 4:31 PM Page 40 User License QUALITY, ACCURACY, TITLE AND FITNESS FOR A PARTICULAR PURPOSE. NO ORAL OR WRITTEN ADVICE OR INFORMATION PROVIDED BY COBRA AND/OR ITS LICENSORS OR ANY OF THEIR AGENTS, EMPLOYEES OR THIRD PARTY PROVIDERS SHALL CREATE A WARRANTY AND USER IS NOT ENTITLED TO RELY ON ANY SUCH ADVICE OR INFORMATION. THIS DISCLAIMER OF WARRANTIES IS AN ESSENTIAL CONDITION OF THE AGREEMENT.
XRS_R7_R9G_Final_012507.qxd:Layout 1 Customer Assistance 1/25/07 4:31 PM Page 41 Product Service Product Service • For questions about operating or installing this new Cobra product, or if parts are missing…CALL COBRA FIRST…do not return this product to the store. If this product should require factory service, call Cobra before sending the product. This will ensure the fastest turn-around time on any repair.
XRS_R7_R9G_Final_012507.qxd:Layout 1 Customer Assistance 1/25/07 4:31 PM Page 42 Trademark Acknowledgement Trademark Acknowledgement Cobra®, 6 Band®, 9 Band®, DigiView®, EasySet®, Extra Sensory Detection®, IntelliMute®, IntelliShield®, LaserEye®, Nothing Comes Close to a Cobra®, Safety Alert® Traffic Warning System, Strobe Alert®, VG-2 Alert®, Xtreme Range Superheterodyne® and the snake design are registered trademarks of Cobra Electronics Corporation, USA.
XRS_R7_R9G_Final_012507.
XRS_R7_R9G_Final_012507.qxd:Layout 1 Customer Assistance 1/25/07 4:30 PM Page 44 Accessories Order Info Ordering From U.S.A. Call 773-889-3087 for pricing or visit www.cobra.com. For Credit Card Orders Call 773-889-3087 [Press one from the main menu] 8:00 a.m. to 6:00 p.m. Central Time, Monday through Friday. Make Check or Money Order Payable To Cobra Electronics, Attn: Accessories Dept., 6500 West Cortland Street, Chicago, IL 60707 U.S.A. To Order Online Please visit our website: www.cobra.
XRS_R7_R9G_Final_012507.qxd:Layout 1 1/25/07 4:30 PM Page BC1 The Cobra line of quality products includes: CB Radios microTALK® Radios Radar/Laser Detectors Safety Alert® Traffic Warning Systems Handheld GPS Receivers Mobile GPS Navigation Systems HighGear® Accessories CobraMarine® VHF Marine Radios CobraMarine® Chartplotters Power Inverters Accessories Nothing Comes Close to a Cobra® For more information or to order any of our products, please visit our website: www.cobra.