Quick Start Guide

Windshield
Quick Start Guide
Printed in China Part No. 480-911-P Version A
Cobra iRadar uses Bluetooth
®
wireless technology to
connect to your iOS or Android
™
device. Through this
connection, the Cobra iRadar app displays radar/laser alerts,
lets you customize detector settings, and provides access to
the iRadar Community.
Cobra iRadar is made for:
iPod touch (5th Generation, 4th Generation)
iPhone 5s, iPhone 5c, iPhone 5
iPhone 4s, iPhone 4
Android
®
smartphones running OS 2.1 or higher
Mounting iRadar
iRadar should be mounted on the windshield or dashboard
of your vehicle. 2 mounting options are included:
Suction Cup Mount –
This is the best option for portability and moving the
detector from car to car. Make sure to thoroughly clean
the suction cups and windshield mounting area to insure
a tight seal.
Hook and Loop Fastener–
Included for dashboard mounting.
Your detector should be
mounted so that it is oriented
parallel to the road.
The suction cup mount comes
standard bent at a 45° angle.
The metal is designed to bend
without breaking. Adjust the
angle so when mounted the
detector is level with the road.
Note: Do not attempt to bend
the mount while the detector
is attached.
Suction Cup Mount
Incorrect Positions
Correct Position
Model iRAD 230
Powering iRadar
NOTE: This device complies with part 15 of FCC rules: Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
This device must accept any interference received including interference that may
cause undesired operation.
CAUTION: Modifications or parts not approved by Cobra Electronics Corporation may
violate FCC Rules and void authority to operate this equipment.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is
subject to the following two conditions: (1) this device may not cause interference, and (2)
this device must accept any interference, including interference that may cause undesired
operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils
radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes
: (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit
accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en
compromettre le fonctionnement.
Follow these simple steps to get your iRadar up
and running:
Plug in your Cobra iRadar detector unit
using the included cigarette lighter
adapter.
Note: the adapter includes a USB port
that can be used to charge your smart-
phone or tablet using the manufacturer’s
charging cable.
For more discreet installation, a
hardwire kit is available at
www.cobra.com, part number
RA-PSC B. This can be easily wired
into your fuse box so that iRadar
automatically turns on when your
car is running and does not require
professional installation.
Turn unit on. A red LED will light. Make sure the iOS/Android
toggle switch is switched to
the correct position. When switched
toward the white circle, your iRadar
will only communicate with iOS
devices. When switched toward the
green circle, your iRadar will only
communicate with Android devices.
iOS/Android Mode
Toggle Switch
Power/Volume Wheel
Hook & Loop Fastener
RA-PSC B
iRAD230_QSG.indd 1 10/17/13 4:34 PM