User's Manual

6
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
Operating Your Handset
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
Operating Your Handset
7
Nothing Comes Close to a Cobra
®
6
English
Getting Started Common MR F300 Functions
Getting Started
•
Refer to the foldout at the front of this manual to identify the various controls and
indicators on your Bluetooth handset.
Most button functions are activated by a momentary press, then release. In those
cases that call for “press and hold,” hold the button down for at least two seconds
after it is pressed. The PTT button is held down as long as you are speaking into
the microphone.
When using the handset, tones will sound to:
■
Indicate an error – three beeps.
■
Confirm an action – two beeps.
■
Confirm a single button press (except the PTT button) – one beep.
You can turn the
Key Tones Off if you want (see page 22).
Try It Out
Using the Bluetooth handset is the most effective way to learn about it. Don’t
hesitate to explore functions and add entries to see how they work. Do not be
concerned if you make mistakes. They can all be undone in
Edit mode. Or you
can reset the unit to the original factory default condition by turning the unit On
while holding down the left two
Function buttons.
Common MR F300 Functions
•
The following procedures define common operating functions of the handset.
Power On/Off
Press the Power button at the top of the handset for two seconds to turn it On
or Off.
The first time you turn On the CobraMarine
Bluetooth handset you will see a
message that the unit is ready for pairing with a cell phone. The message also
provides a password. If you do not want to pair a device right away, press the
Escape button to go to Standby mode.
When the unit is subsequently turned On, it will search for the currently selected
Bluetooth device and go to Standby mode.
Mode/VOX
This button serves two functions:
■
To change the mode of operation between the Bluetooth handset and
your cell phone itself.
■
To switch voice activation of the microphone between On and Off. Turn VOX On
if you want to operate in a hands-free mode similar to a
Bluetooth handset.
Mode
Normal operation of the CobraMarine Bluetooth handset uses its internal
microphone and speaker to conduct conversations during a call. However,
there may be times you want to suspend the
Bluetooth pairing and continue
part or all of the call on your cell phone itself.
To Change Between Handset and Cell Phone Modes:
1.
Press the Mode/VOX button to switch the call to your cell phone.
2. Talk and listen to your cell phone in the usual way. The handset will be inactive.
3. Press the Mode/VOX button to restore operation to the handset.
4. Talk and listen to the call on the Bluetooth handset.
o Operation Customer
A
ssistance
Warranty
Notice
ons
Caution Warning
Installation
Customer
Assistance
NOTICE
Resetting the unit will clear ALL Bluetooth device pairings as well as the
Call Log, Phonebook and Bluetooth device list.
10732 Cobra MR F300 Ebody L4 mi.qxp 5/6/08 8:35 AM Page 6