User's Manual

Reply Type
The ability to send your position to another station is an added feature of DSC
radios that have GPS attached. It is handy for rendezvous and rescue situations.
Your CobraMarine
™
VHF radio allows you to choose whether to have the radio automatically
respond to all position requests it receives or to alert you to a position request and
allow you to choose whether to respond or not — manual reply.
To Set The Position Request Reply Type:
1.
Enter the Settings menu and scroll to POS RPLY
(Position Reply) with the Up/Down buttons.
2. Press the Call/Set button and observe the current
setting —
AUTO or MANUAL.
3. Use the Up/Down buttons to change the setting.
4. Press the Call/Set button to select the setting.
5. Use the Up/Down buttons to scroll to EXIT.
6. Press the Call/Set button to return to the Settings menu.
Individual Directory
DSC calling allows you to call another vessel or station
directly if you know its MMSI number. Your CobraMarine
™
VHF radio allows you to store up to ten (10) names and
their associated MMSI numbers for quick access.
To Enter Or Edit Names And MMSI Numbers
In The Directory:
1.
Enter the Settings menu and scroll to INDV DIR
with the Up/Down buttons.
2. Press the Call/Set button to enter a memory
location (01-10).
3. Use the Up/Down buttons to scroll through the
memory locations to one you want to select.
Nothing comes close to a Cobra
®
DSC Set-Up
59
58
English
DSC Set-Up
4. Press and hold the Call/Set button to select the
memory location. The cursor will begin to blink at
the first character under
NAME.
5. Use the Up/Down buttons to scroll through the character list.
6. Press the Call/Set button to select a character. This will also
move the blinking cursor to the next character under
NAME.
7. Repeat steps 5 and 6 to enter additional characters —
up to a maximum of nine (9) — for the name.
8. After entering the name, press and hold the Call/Set
button to move the blinking cursor to the first character
under MMSI.
9. Use the Up/Down buttons to scroll through the number list.
10. Press the Call/Set button to select the number and
move the cursor to the next character under MMSI.
11. Repeat steps 9 and 10 until the nine (9) digit
MMSI is entered.
12. Press and hold the Call/Set button to move to the
next memory location or exit.
13. Select NEXT or EXIT with the Call/Set buttons.
If
NEXT is selected, pressing the Call/Set button will
move to the next memory location where another
name can be entered by repeating steps 3 through 11.
If
EXIT is selected, pressing the Call/Set button
will return you to the
Settings menu.
You can enter a total of ten (10) names and MMSI
numbers in the directory.
Auto Mode
Settings Menu
Position Reply
Number List
Settings Menu
Individual Directory
Location
Operating Your Radio Operating Your Radio
Name
Next