User's Manual

Nothing comes close to a Cobra
®
DSC Operation
73
72
English
DSC Operation
Call Waiting
Call Waiting functions similarly to the Caller ID function on your telephone.
It will capture the caller’s MMSI identification number and any other data
included in a DSC message.
NOTE
The Call Waiting memory can hold up to twenty (20) messages.
Once the memory becomes full, each new call will erase the oldest
call information on a first-in-first-out basis.
To Enter Call Waiting And Review
Messages Received While In DSC Standby:
1.
From Standby mode, press the Call/Set button
to enter the
Call Send menu.
2. Use the Up/Down buttons to scroll to CALL
WAIT
(Call Waiting).
3. Press the Call/Set button to enter the Call Waiting mode.
The first message will appear on the LCD and the third
line will show the type of message —
INDIVIDUAL
or DISTRESS.
To Scroll Through All Of The Messages:
1.
Use the Up/Down buttons to move from
message to message in the
Call Waiting memory.
To Clear Messages From The Call Waiting Memory:
1.
Use the Up/Down buttons to select the
message you want to delete.
2. Press and hold the Memory Scan/Memory
Clear
button for one (1) second or more.
The selected message will be deleted and the next message
in the memory will show on the LCD. You can delete each
message in turn by repeating steps 1 and 2.
To Exit The Call Waiting Mode:
Press the Call/Set button to return to Standby mode.
Name and Position
Call/Set Button
Memory Scan/Clear
Up/Down Buttons
Call Waiting
Standby Mode
Operating Your Radio Operating Your Radio
Receiving A Position Send
When another station sends you its position in Position
Send
mode, the Individual alarm will sound and the station’s
name and position will be shown on the LCD. Press any
button to turn
Off the alarm and return to Standby mode.
Standby Signal
If you will be away from your radio or otherwise unable to answer calls,
you can put the radio into
DSC Standby mode. When in DSC Standby mode,
your radio will log all calls received into its Call Waiting memory and respond
automatically to Individual calls with an
UNATTENDED message. You will
then be able to retrieve those calls from the
Call Waiting memory.
NOTE
The Call Waiting memory can retain up to twenty (20) calls.
See the following section for information on
Call Waiting.
To Enter Standby Mode:
1.
From Standby press the Call/Set button to
enter the
Call Send menu.
2. Use the Up/Down buttons to select STANDBY.
3. Press the Call/Set button to enter DSC Standby mode.
The radio will then remain in
DSC Standby
mode until you exit from that mode.
To Exit DSC Standby Mode:
1. From DSC Standby mode, press the Call/Set
button to return the radio to Standby mode.
Call/Set Button
Up/Down Buttons
Reviewing Messages
Standby Mode
Please advise on
screen illustration
to pick up.
DSC Standby Mode