User's Manual

English

External Devices

and Connections

NOTE

Satellite acquisition time is dependent on the GPS device.

CobraMarine Chartplotter MC 600C Series

Your CobraMarine VHF radio is set up to connect directly to your chartplotter

with a custom accessory cable that eases the installation.

The chartplotter uses a state-of-the-art electronic chart system, designed as a

custom navigation aid. All calculations and information necessary for the

navigation are performed and displayed on the chartplotter quickly and

accurately providing all of the capabilities of a conventional GPS, but with the

added benefit of a powerful electronic chart display.

Wiring the chartplotter to the transceiver is made easy with a custom-made

optional Accessory Cable harness P/N CM 140-001. This cable has a molded

8-pin connector that plugs directly into the appropriate connectors on the MR

F80 and the MC 600C Series.

To Install the Chartplotter:

1. Install the chartplotter in a convenient location according to the

chartplotter owner’s manual.

2. Connect NMEA out positive (+) wire to NMEA in positive (+) wire coming

from the chartplotter.

3. Connect NMEA out negative (-) wire to NMEA in negative (-) wire coming

from the chartplotter.

4. Plug 8-pin rubber connector into transceiver.

Installation And Start-Up

MR F80 to Chartplotter Connection

F80 Installation.qxp:QXP-1058720374.qxp 11/3/06 4:18 PM Page 34