User's Manual

Introduction
Nothing Comes Close to a Cobra
®
Product Features
69
Digital Select Calling (DSC)
Operation
Receiving an Individual Call
When another station makes an Individual call to the radio:
■
The Individual alarm sounds.
■
The caller is identified on the LCD.
■
The radio switches to the channel selected by the caller.
■
Call information is placed in the Call Log.
To Receive an Individual Call:
Press the Talk button and greet the caller.
Sending a Group Call
Sending a Group call is like sending an Individual call, but
the group MMSI information is used and the resend and
DSC responses do not apply.See section 4 for creating and
entering a group MMSI.
To Send a Group Call:
1. In Standby mode, press the Call/Setup button to enter
the Group call menu.
2. Turn the Channel knob or press the microphone channel
UP/DOWN buttons to scroll to Group.
3. Press the Enter button to move to the channel select
menu.
4. Turn the Channel knob or press the microphone channel
UP/DOWN buttons to select a channel to communicate
the call.
5. Press the Enter button to send the message.
■
All radios switch to the channel selected in step 1.
Press and hold the Talk button to send a voice message
to everyone in the group.
■
Anyone in the group can transmit on the channel.
Operating Your Radio
Caller Identified
GRP MMSI Menu
Group Calling
Send/Exit
Group Waiting
8187-F80-Operation-8_MMB:F75-Operation-8 11/3/06 4:09 PM Page 69