User's Manual

74
English
Digital Select Calling (DSC)
Operation
Operating Your Radio
Standby Mode Signal
If you will be away from your radio or otherwise unable to
answer calls, you can put the radio into DSC Standby mode.
When in DSC Standby mode, your radio will log all calls
received into its Call Log memory and respond
automatically to individual calls with an UNATTENDED
message. You will then be able to retrieve those calls from
the Call Log memory.
NOTE
The Call Log memory can retain up to 20 calls. See
the following section for information on Call Log.
To Enter Standby Mode:
1. From Standby mode, press the Enter button to enter the
Call menu.
2. Turn the Channel knob, or press the microphone Channel
Up/Down buttons or press the Function (F1/F2) button to
select STANDBY.
3. Press the Enter button to enter DSC Standby mode.
The radio will then remain in DSC Standby mode until you
exit from that mode.
To Exit DSC Standby Mode:
From DSC Standby mode, press the Enter button to return
the radio to Standby mode.
Standby Select
DSC Standby Mode
Standby Mode
8187-F80-Operation-8_MMB:F75-Operation-8 11/3/06 4:10 PM Page 74