User's Manual

Operating Your Radio

Nothing Comes Close to a Cobra

Digital Select Calling (DSC)

Operation

Call Log

Call Waiting functions similarly to the Caller ID function on

your telephone. It will capture the caller’s MMSI

identification number and any other data included in a DSC

message.

NOTE

The Call Log memory can hold up to 20 messages.

Once the memory becomes full, each new call will erase

the oldest call information on a first-in, first-out basis.

To Review Call Log Messages Received While in DSC

Standby Mode:

1. From Standby mode, press the Call button to enter the

Call menu.

2. Turn the Channel knob, or press the microphone Channel

Up/Down buttons to scroll to CALL LOG menu.

3. Press the Enter button to enter the Call Log.

NOTE

The fourth line will show the type of message.

4. Turn the Channel knob, or press the microphone Channel

Up/Down buttons to move from message to message in

the Call Log memory.

5. Press the Enter button to return to Standby mode.

To Clear Messages From The Call Log Memory:

1. From Standby mode, press the Call button to enter the

Call menu.

2. Turn the Channel knob, or press the microphone Channel

Up/Down buttons to scroll to CALL LOG menu.

3. Press the Enter button to enter the Call Log mode.

4. Turn the Channel knob, or press the microphone Channel

Up/Down buttons to select the message you want to

delete.

5. Press and hold the Memory Scan/Memory Clear button

for one (1) second or more.

Repeat steps 4 through 5 to delete additional messages.

6. Press the Enter button to return to Standby mode.

All Messages Viewed

Call Log Menu

Unread Messages

8187-F80-Operation-8_MMB:F75-Operation-8 11/3/06 4:10 PM Page 75