User's Manual

Nothing Comes Close to a Cobra

Advanced Operation

Using Tri-Watch

Tri-Watch Scan Mode:

1. From Marine or GMRS Standby mode, press the

TRI-WATCH button. The TRI icon will appear on the

LCD display and the radio will scan through the

three (3) Tri-Watch memory channels.

2. A signal on any one (1) of the three (3) channels

will stop the scan for 10 seconds to allow you to

listen to the traffic on that location.

NOTE

After the Tri-Watch scan stops to monitor a channel,

as long as you do not press any buttons within 10

seconds, your radio will automatically resume

scanning the Tri-Watch channels.

3. Press the Channel Up/Down button to resume

scanning the Tri-Watch channels or to change the

scan direction.

4. To EXIT the Tri-Watch scan, press the TRI-WATCH

button again. The TRI icon will disappear from the

LCD and the radio will return to Marine or GMRS

Standby mode.

Operating Your Radio

TRI-WATCH Button

Tri-Watch Scan Mode

MRHH425VP-Body-Eng.qxp:400_Body 10/26/06 1:38 PM Page 65