User's Manual

34
English
Antenna, Wrist Strap
and Belt Clip
Antenna, Wrist Strap and Belt Clip
•
Antenna Installation
The flexible antenna for the radio is shipped separately in
the package and must be attached before you use the radio.
1. Align the base of the antenna with the socket in the
top of the radio.
2. Screw it all the way into the socket. Be sure that
the seal seats properly.
NOTICE
Operating the radio without the antenna in place may
damage the unit. The radio is not waterproof until the
antenna and battery pack are in place with their seals
properly seated.
Wrist Strap
The radio comes with the wrist strap already attached.
It can be easily removed if you choose not to use it.
Belt Clip
Use the spring-loaded belt clip to carry the radio on your
belt.
1. Press open the belt clip, slide it over the belt and release
the clip.
2. Insert the round guide on the back of the radio into the
guide channel on the back of the belt clip. You must have
the radio upside-down, as shown, to remove it from the
belt clip.
3. Once the knob has been inserted all the way into
the belt clip channel, the radio will swing freely
while being securely retained.
VHF Marine Radio ProtocolsInstallation
Install Antenna
Wrist Strap
Belt Clip Secured to Belt
Insert Knob onto Belt Clip
Secure Radio
MRHH425VP-Body-Eng.qxp:400_Body 10/26/06 1:36 PM Page 34