Operating Instructions for Your Cobra® microTALK® 2-WAY RADIO MODEL PR 330 Instrucciones de uso del RADIO BIDIRECCIONAL MODELO PR 330 Cobra® microTALK® FPO Nothing comes close to a Cobra™ English, pages 1-16 Nada se compara a Cobra ™ Español, páginas 17-30
ENGLISH P R O D U C T F E AT U R E S Antenna ON-OFF/ POWER button TALK button LIGHT/MAX RANGE button speaker/ microphone belt clip MODE button backlit LCD display VOLUME UP & DOWN buttons CHANNEL SELECT buttons battery charger pads LOCK tab battery compartment Important TALK button FCC Licensing Information The PR 330 radio operates on General Mobile Radio Service (GMRS) frequencies which require a Federal Communications Commission (FCC) license.
ENGLISH O P E R AT I O N Turning On Your microTALK® Radio 1. Press and hold the ON/OFF POWER button for 2 seconds. A series of audible tones will indicate the radio is on. ON-OFF/POWER button Battery Indicator When only one segment of the battery indicator is blinking, the battery power is low and you should recharge your battery pack or change your AAA alkaline batteries. Auto Battery Save ® 2. Your microTALK is now in Standby mode, ready to receive transmissions.
ENGLISH O P E R AT I O N Talking to Another Person Auto Squelch Using the Lock Function 1. Press and TALK button hold the TALK button. 2. With the microphone about 2 inches (5 cm) from your mouth, speak in a normal voice. Your microTALK® radio is equipped with Auto Squelch, which automatically shuts off weak transmissions and unwanted noise due to terrain, conditions, or if you’ve reached your maximum range limit. (NOTE: To learn more about the range of your microTALK® radio, see page 13.
ENGLISH O P E R AT I O N Using VOX Mode In VOX mode, your microTALK® can be used "hands-free," automatically transmitting when you speak. To turn VOX mode on and off: 1. Press the MODE button until the VOX icon flashes and the current setting ("on" or "off") is displayed. MODE button 2. Push the CHANNEL SELECT button up or down to turn VOX mode on or off. CHANNEL DOWN CHANNEL UP 3.
ENGLISH O P E R AT I O N Recalling Memory Locations To scan main channels: To recall a channel you have stored in a memory location: 1. Press the MODE button until the Memory icon and a memory location flashes. 1. Press the MODE button until the Scan icon and main channel number flashes. MODE button MODE button 2. Select your desired CHANNEL SELECT memory location button by pushing the CHANNEL SELECT button up or down. Press the LOCK LOCK button to enter button your selection.
ENGLISH O P E R AT I O N 3. The radio will continue to scan all memory locations and stop if an incoming transmission is detected. The unit will remain on that location for 10 seconds. During that time you can: a) Press and hold the TALK button and talk. The radio will remain on that memory location channel and return to Standby mode. TALK button b) Push the CHANNEL SELECT CHANNEL SELECT button button up or down to resume scanning memory locations. c) Press the MODE button to proceed to other functions.
ENGLISH O P E R AT I O N Changing Call Tone Settings microTALK® Range You can choose between five different call tone settings to transmit a unique call alert. To select a call tone setting: 1. With the power turned off, press and hold the CALL button as you turn the power on. The number of the current call tone setting will flash and the tone will sound for one second. Your microTALK® radio has a range of up to 2 miles (3 km). Your range will vary depending on terrain and conditions.
ENGLISH FCC INFORMATION •SPECIFICATIONS FCC Licensing Information The PR 330 radio operates on General Mobile Radio Service (GMRS) frequencies which require a Federal Communications Commission (FCC) license. For licensing information and application forms, please call the FCC Hotline at: 1-800-418-FORM (Request form #159 and form #605) If you have any questions regarding the license application, you can contact the FCC directly at: 1-888-CALL-FCC or visit their website at www.fcc.
