3. OPERATION 3 EONS on LOD EMG a» ODO ae D0 Fall =o Goa Key lock indicator | Indicates that the key lock function is in use. 13 Receive signal indicator | Appears when receiving signal or squelch noise is existing. 3) Monitor indicator © Appears when fo 770 fan in ase and schlepped is open, } 4} Emergency channel indicator © Indicates while revving 8 emergency channel, S¥ Sean indicator : Indicates that Sean is enabled. 5} TORS indicator © Appears when the CSS function is in nse.
.2 Key Function 13 Volume controls 1 Turn the power on and adjusts the audio level, ZY FIT switch : Push and hold 10 transmit ; release to receive. 3) Monitor / Lamp Key © Press and hold this key forever 2 seconds 1 enable the receive COTES feature, And Push this button momentarily to switch on Tor off the LCD back-lighting. 4) Channel Up/Down key © Push to select the operating channel Push and hold to change the current channel rapidly.
2} Function display a8 Tell EMG Son hip 1} Key lock indicator 5 Indicates that the key lock function is in 2} Receive signal indicator © Appears when receiving signal or squelch noise is existing 3} Monitor indicator : Appears when any CSS isn’ tin use and squelch is open, 4} Emergency Channel indicator : Appears when emergency Chanel is in use, 5) Sean indicator » Indicates that scan is enabled. 6) OUTCLASS indicator: Appears when the CSS unction #s in use.
3-3 SETTING AND OPERATION 1} Basic Channel Selection In order to communicate with other GARS units, both you and the receiving party must be on the same channel, PR-900 has Channels indicated by the large digits. on the LCD display panel. Before trying to transmit 00 the selected channel, vou should press the Monitor Button to check the activity on, that chanteuse.
ta the sane channel with the sub-code set to OFF 3) Auto Channel Sean List Selection Mode This feature allows you to scan for an active channel and communicate with the party transmitting, To access the Auto Channel Scan Skip List menu, -. Press the Mode Button mach] the Terr (SKIP) blinks on the LCD panel ~. Press the Up Button to choose the desired Scan access channel, or Down Button to choose the desired Scan skip channel. « Press the PTT Button to confirm your selection «.
-. Press the PTT button to confirm your selection. «To turn on the VOX feature, press PTT button + Power UN «To turn off the VOX feature, Power ON again 6} Auto Key Lock Selection Mode This feature prevents accidental channel change and disturbance fo the preferred settings of the communicator, Auto Key Lock temporarily disables to Up Down and PTT button, To access the Auto Key Lock selection menu, -.
-. Press the Up button or Down button to select the sec Scotch, 180sec or OFF « Press the FIT button to confirm your selection. 16 Emergency Channel Mode The Emergency Channel can be used to special frequency (chancellor 462.67500Mbi) within your transceiver. No matter what mode the transceiver is in, the, Emergency Channel always can be Selected quickly. To gasses the Emergency Channel mode, -~ Press Emergency button | Appears the (EMG) and 10 chance! readout an the LOD panel.
