User's Manual

Settings
Your Detector
Nothing Comes Close to a Cobra
®
7
Settings
Your Detector
6
English
Settings
•
When changing the Settings on your detector, please keep in mind:
■
Each time the unit is turned On the factory settings of Highway
and Auto Mute-On will be set. They can be changed while the
unit is in use as described in the following sections.
Highway/City Mode
Setting your detector to City mode delays all X band audio alerts at lower
signal strength levels. (A single beep will sound when the signal is first
detected.) This will reduce false alerts while you are driving in, or near,
urban areas where there are many sources for conflicting X band signals
such as microwave towers and automatic door openers.
To change settings, follow the procedure listed below, which indicates
what you will see and hear as you complete each step. The factory setting
is Highway mode.
City Button
Press and release
City Mode
Highway Mode
To Change From Highway Mode To City Mode
Touch the City area.
Tone
Visual Display
One (1) beep L/C appears in the display
To Change From City Mode Back To Highway Mode
Touch the City area
again.
Tone
Visual Display
Two (2) beeps L/C disappears from the display.
Muting An Alert
Your detector allows you to quickly turn Off an audio Alert by momentarily
pressing the Mute button. If you press the Mute button a second time
during the Alert, the audio Alert will be turned back On.
Mute Button
Touch and release
P X/K Ka L/C
P X/K Ka L/C
SSR50_MANL_BODY:7000-Body 7/12/11 9:21 AM Page 6