User manual

WASPcam™ 9906 CAMO User Manual
01 June 2016 Page 9
Screen Icons
At the left of the LCD screen it displays the video icon, loop recording icon, white balance
icon and the audio record icon.
At the right of LCD screen it displays the remaining recording time, resolution, SD card icon,
and the battery icon. On the bottom of the LCD screen it displays the date and time.
Zoom In/Out
While in record or photo mode, use the left and right arrow buttons to zoom in/out.
Menu Interface Introduction
When in standby mode, press the menu button to enter settings, press the left/right arrow
buttons to choose the options, then press the OK button to confirm. Press the menu
button again to quit.
Recording Functions
Normal Recording
In video mode press the record button to start a video. The green LED light between the
arrows will flash and the recorded time and recording icon will be displayed on the top of
the LCD screen.
Press the record button again to stop recording and save the file – the estimated remaining
recording time is displayed at the top of the LCD screen.
Loop recording
In video mode press the menu button and use the right arrow to turn on Looping (for more
details refer to Video Settings). Exit the menu and press the record button to start a video.
The LED light between the 2 arrows will flash green and the red flashing recording icon and
the recording time will be displayed at the top of the LCD screen.
After the looping duration, the camera will stop recording automatically and save the video,
and then continue recording a new video file without missing a second of footage.
When the SD card is full, camera will delete the oldest video footage automatically and
continue recording.
At any time while recording, you can press the record button to stop and save the video. The
remaining time is displayed at the top of the LCD screen.