User's Manual

Settings
Your Detector
Nothing Comes Close to a Cobra
®
13
Settings
Your Detector
12
English
Spectre 1 and VG-2 Alert Audio Settings & Ku Band Detection
The detector is undetectable by police Spectre 1 and VG-2 radar detector detectors and
will alert you when such a device is in use near your vehicle. During the alert, the unit
continues to detect other signals. You can choose whether or not you want your unit to
show
Spectre 1 and VG-2 alerts. The factory setting is Spectre 1 and VG-2 alert on.
The new
Ku band may be introduced to North America in the future. To prevent
false alerts until it is, the factory default for
Ku band detection is off.
Dim Button
Press and hold
for two seconds
Voice/Tone Setting
You can set your detector to sound alerts with either a Voice
or a Tone. You can change settings by using the Mute button.
In
Voice Alert mode, you will first hear several tones, then a
voice message announcing the type of signal detected, followed
by more tones. In
Tone Alert mode, you will hear the tones only.
The factory setting is
Voice Alert mode.
Mute Button
Press and hold for
two seconds
To Change From Voice Alert to Tone Alert
While no signal
is being detected,
press and hold
the Mute button for
two seconds.
Tone Voice
Visual Display
One beep Tone Alert None
To Change From Tone Alert Back to Voice Alert
While no signal
is being detected,
press and hold
the Mute button
for two seconds
again.
Tone Voice
Visual Display
None Voice Alert None
To Turn Spectre 1 and VG-2 Alerts Off and On
While no signal
is being detected,
press and hold
the Dim button
for two seconds.
Tone Voice
Visual Display
One beep Spectre
VG-2 Off
Spectre1
& VG 2
Off
Two beeps Spectre
VG-2 On
Spectre1
& VG 2
On
To Turn Ku Band Detection On or Off
Tone Voice
Visual Display
Two beeps Ku On Ku On
One beep Ku Off Ku Off
Spectre 1 and VG-2 Off
Spectre1
& VG2
Off
Spectre 1 and VG-2 On
Spectre1
& VG2
On
While no signal
is being detected,
press and hold the
Dim button for two
seconds to set
Spectre 1 and VG-2
alerts on or off.
Then, press and hold
the Dim button for
two seconds again.