User's Manual
Overview
Introduction
2
English
This manual describes the simple steps for mounting, setting up and using your
detector. It also provides helpful information about how radar and laser guns are
used and how you can interpret the alerts you receive.
Before you begin your installation, please read the Important Information section
on page A1 and use the descriptions and feature lists on pages A2 and A3 to
become familiar with your new detector.
About Your Detector
•
Display
This detector’s innovative new display provides more, easier-to-use information
than any technology to date. Using an OLED (Organic Light Emitting Diode)
screen, the display offers large graphical alerts to signals as they are detected.
Do not be alarmed by the nearly blank display you see when you first turn the
unit on. The detector will function and alerts will appear as signals are detected.
You can also elect to turn on the built-in Compass, IntelliMute and Car Voltage,
so that they appear during normal operation. The initial and startup screens are
shown on page 6.
Programming
EasySet Programming lets you conveniently customize the operation of your
detector by changing the settings. You may want to start using the detector
with the factory settings and then make changes after you are more familiar
with the unit.
About This Manual
•
Please take a moment to learn about some special features of this manual.
Modular Descriptions
Once the detector is in use, this manual can be used as a ready reference to
individual topics as needed. Each topic is completely covered in its section and
cross-references to related topics are included where appropriate.
Appendix
The appendix pages 34–36 provide quick reference charts on the programming
features of your detector.
Appendix
Nothing Comes Close to a Cobra
®
35
Nothing Comes Close to a Cobra
®
35
Introduction
Mode Tone
Visual
Display
Voice
Set
customizable
display
colors***
Page 18
Set car
battery
voltage
display
mode
Page 19
Two
beeps
Multi
One
beep
Red
Blue
Orange
Green
Two
beeps
Display
Car Volt-
age Off
One
beep
Display
Car Volt-
age On
Set battery
low car
voltage
warning
Page 19
Two
beeps
Car
Voltage
Warning
Off
One
beep
Car
Voltage
Warning
On
Restore
factory
settings
Page 19
Two
beeps
Restore
Factory
Settings
Mode Tone
Visual
Display
Voice
Set
Smart-
Power
mode
Page 18
Two
beeps
Smart
Power
On
One
beep
Smart
Power
Off
Set Display
Timeout
Interval
Page 18
Set display
Dim mode
default
Page 18
One
beep
15
SECONDS
15
Seconds
Two
beeps
30
SECONDS
30
Seconds
One
beep
ONE
MINUTE
One
Minute
One
beep
THREE
MINUTES
Three
Minutes
One
beep
ALWAYS
ON
Always
On
Two
beeps
Dim
One
beep
Dimmer
One
beep
Dark
*** Press Dimrepeatedly for all optional colors.
NOTE
Factory defaults are highlighted in
light gray. See referenced pages for
more information on the modes.
User Programming Menu Guide (continued)
Appendix
Spreads.qxd 11/9/07 12:19 PM Page 2