User Manual

11
Radar Menu
GPS Filter
Toggles GPS o and on. GPS Filtering enables you to
store and lock out, or ignore, xed location false
alerts in Road Scout’s memory. Common sources of
xed location false alerts are storefront automatic
door openers and motion sensors. To store a false
alert location, press MUTE three times during an
alert. Subsequent alerts to this signal will be muted
and displayed in grey (factory default is on).
Note that GPS Filter will not lock out moving false
alerts commonly caused by vehicle blind spot
monitoring and collision avoidance systems.
Auto Power
Automatically turns o Road Scout after the set time
period. This is especially useful if your vehicle has a
constant-on lighter outlet (factory default is 4 Hours).
Band Settings
The band settings menu allows you to toggle o
and on Radar bands, K and Ka narrow band
segments, Laser, and TSR ltering.
WARNING: Do not turn o any bands or narrow
band segments unless you are absolutely certain
there are no trac radar guns using that specic
band or narrow band in your area.
To navigate Band Settings, select
Modify , then
repeatedly press MARK to cycle through all of the
band settings. Use the Rotary Dial to turn o and on
a band setting.
To exit Band Settings, select
Exit or simply wait a
few seconds.
Disabling K band allows you to select K Narrow
segments 1-4.
K Narrow 1 23.950 – 24.050 GHz
K Narrow 2 24.050 – 24.110 GHz
K Narrow 3 24.110 – 24.176 GHz
K Narrow 4 24.176 – 24.250 GHz
Disabling Ka band allows you to select Ka Narrow
segments 1-7.
Ka Narrow 1 33.400 – 33.700 GHz
Ka Narrow 2 33.700 – 33.900 GHz
Ka Narrow 3 33.900 – 34.600 GHz
Ka Narrow 4 34.600 – 34.800 GHz
Ka Narrow 5 34.800 – 35.400 GHz
Ka Narrow 6 35.400 – 35.600 GHz
Ka Narrow 7 35.600 – 36.000 GHz
Location Settings
The Location Settings menu allows you to toggle o
and on each type of location based alert.
To navigate Location Settings, select Modify, then
repeatedly press MARK to cycle through the
location settings. Use the Rotary Dial to turn o and
on a location setting.
To exit Location Settings, select Exit or simply wait a
few seconds.
Bluetooth®
Turn o and on Bluetooth communication (factory
default is on).
Wi-Fi
Turn o and on Wi-Fi communication (factory
default is on).