Specifications

When switched to NB/ANL position the RF
Noise Blanker and Automatic Noise Limiter is
activated,providing increased noise filtration.
When switched to the ANL the Automatic
Noise Limiter is activated.This helps reduce
noise created by the vehicle’s electronics.
When switched to OFF position Noise
Blanking and Automatic Noise Limiting
Filtration will be turned off.
OperationOperation
1514
NB/ANL, ANL,
OFF (Noise
B l a n k e r, Automatic
Noise Limiter
Switch
RF Gain Control
Bright/Mid/Dim
Switch
RF Gain Control
The RF Gain is used to optimize reception in
strong or weak signal areas.
Bright/Mid/Dim Switch
Note
The RF Gain is used to optimize
reception in weak signal areas.
Note
The RF noise blanker is very
effective in reducing repetitive
noises such as ignition interfer-
ence.
Switch to BRT,MID or DIM to control bright-
ness of the channel indicator and multi-func-
tion meter for day or nighttime driving.
Rotate the RF Gain knob anticlockwise to
reduce gain in strong signal areas.In weak
signal areas turn clockwise to increase gain.
1
NB/ANL,ANL,Off Switch
1
1
2
GR25LTDST-English copy 6/21/99 11:59 AM Page 14