Use and Care Manual

WASPcam™ 9905 Wi-Fi User Manual
01 June 2016 Page 19
Playback on TV
Turn the camera on; connect the camera to the TV with the Video cable. Select USB mode
on the TV then go into the camera menu settings and make sure the TV Out is set to “On”.
The LCD screen on the camera will turn off automatically and now all operations and
functions can be seen on the TV.
**Note: TV Video cable is not included and when connected it will only transmit
images/videos but no sound.
View Files on PC / MAC
Connect the camera to the computer using the included USB cable. The LCD Screen displays
Mass Storage and Camera. Press the left/right buttons to select Mass Storage and the
record button to confirm. . Click on the CARDV folder on the computer. There are two sub
folders MOVIE and PHOTO. Open and view the corresponding files.
Web cam – PC Only
Connect the camera to the computer using the included USB cable. The LCD Screen displays
Technical Specifications
Sensor
5 CMOS Sensor
Video Resolution
1080p/30fps, 720p/60fps, WVGA/60fps, VGA/120fps
Image Size
12MP / 8MP / 5MP
Memory
Micro SD card up to 32GB – Class 10
Lens
170° Wide View Angle
Video Format
.mov
Image Format
JPG
Wi-Fi
802.11b/g/n
Remote
2.4G Remote Control
Audio
Built-in Mic, Speaker
Port
Micro USB, HDMI, TV OUT (Connects to Video Cable via Micro USB
port)
Battery
Lithium-ion Rechargeable Battery 1050mAh
Screen
1.5 inch LCD
Waterproof
Down to 98 feet (30 meters) without an external housing