User Manual

12
13
Nothing Comes Close to a Cobra
®
Operation
Mode Functions
Operation
Customer Assistance WarrantyIntroduction
Roger Beep Confirmation Tone
•
Your listener will hear an audible tone when you release the Talk button.
This alerts the other party that you are finished talking and it is OK for
them to speak.
To turn roger beep on or off:
1. Press the Mode/Power button until the
Roger Beep icon flashes. The current
on or off setting is displayed.
2. Press the Channel Up or Channel Down button
to select roger beep on or off.
3. Choose one of the following:
a. Press the Mode/Power button to enter the
new setting and proceed to other functions.
b. Press Talk or Call/Lock button to return to
Standby mode.
c. Do not press any buttons for 12 seconds to enter
the new setting and return to Standby mode.
Roger Beep On
Key Tone On/Off
•
When Key Tone is On, an audible tone will sound each time a button
is pressed.
To turn key tone on or off:
1. Current key tone status On/Off will flash.
2. Press the Channel Up or Channel Down button
to select key tone on or off.
3. Choose one of the following:
a. Press the Mode/Power button to enter the
Standby mode.
b. Press Talk or Call/Lock button to return to
Standby mode.
c. Do not press any buttons for 12 seconds to enter
the new setting and return to Standby mode.
MEM
ESC
TRI
WATCH
SCAN
VOLUME
CALL
MODE
CHANNEL
Channel Button
MEM
ESC
TRI
WATCH
SCAN
VOLUME
CALL
MODE
CHANNEL
Channel Button
MEM
ESC
TRI
WATCH
SCAN
VOLUME
CALL
MODE
CHANNEL
Mode/Power
MEM
ESC
TRI
WATCH
SCAN
VOLUME
CALL
MODE
CHANNEL
Mode/Power
MEM
ESC
TRI
WATCH
SCAN
VOLUME
CALL
MODE
CHANNEL
Rewind-Say-Again
Button
MEM
ESC
TRI
WATCH
SCAN
VOLUME
CALL
MODE
CHANNEL
Mode/Power
MEM
ESC
TRI
WATCH
SCAN
VOLUME
CALL
MODE
CHANNEL
Channel Button
R
X
Vox
HI MED LO WX
TW DCS Scan
CTCSS Mem
BURP Power Saver
Rewind-Say-Again
Icon
Rewind-Say-Again
®
•
Rewind On/Off
If Rewind is enabled, the last 20 seconds of incoming audio is recorded
and you can play back calls by pressing the Rewind button.
To set the Rewind mode ON or OFF:
1. Press the Mode/Power button until the Rewind
icon appears.
2. Press Channel Up/Down button to select ON or OFF.
3. Press Push-to-talk (PTT) button to save entry.
Use the Cobra exclusive Rewind-Say-Again
®
feature to replay or record the last 20 seconds of an
incoming audio transmission.
Example 1:
When music or conversation creates too much
noise to hear an inbound message clearly, press the
REWIND button to hear the message a second time.
Example 2:
When listening to an urgent message with confusing
background noise, press the REWIND button to hear
the message a second time. To erase the recorded
audio, hold down the REWIND button while turning
on the radio. 2 confirmation beeps will be heard
indicating that the recorded audio has been erased.
Hold the Rewind button to lock the recording
memory (the Rewind icon flashing) and save
the currently recorded transmission.