Operation Manual

OPERATION
SELECTING A CHANNEL
OPERATION
SETTING THE SQUELCH
To achieve the Desired Squelch
Setting (DSS):
1. Turn SoundTracker on
2. Turn the Squelch Control
(SQL) counterclockwise until
you hear nothing but static.
3. Slowly turn the Squelch
Control back clockwise, just
until the static stops. This is the
optimum receiving level, (DSS)
allowing only strong signals to
come through.
SOUNDTRACKER
TM
S OUND T RACKER
TM
S OUND T RACKER
TM
SETTING THE SQUELCH
Think of your Squelch Control as a gate for incoming signals. If you turn
the Squelch Control fully clockwise, you effectively close the “gate”
and no signals will pass through. If you turn the Squelch control fully
counterclockwise, you open the gate and all signals come through.
SELECTING A CHANNEL
1. Change channels by pressing either the
channel s up or channel t down key .
2. To quick-advance channels, press and
hold either key.
Channel UP
Channel DOWN
15
14
75WXST_MANL.indd 15-16 9/24/12 10:39 AM