Bluetooth Headset User Guide ® CBTH1
Index 1. Introduction 2. Package List 3. Product Illustration 4. Charging the Headset 5. Power On/ Off 6. Pairing the Headset (or any Bluetooth® wireless device) 7. Wearing the Headset 8. Answering Incoming Calls 9. Refusing Incoming Calls 10. Ending Calls 11. Voice Dialing 12. Redialing 13. Transferring Calls Between Handset and Headset 14. Placing Calls On Hold 15. 3 Way Conference Calling 16. Adjusting the Volume 17. Safety Instruction 18. Specifications 19. Trouble Shooting 20. Headset Care 21.
1. Notice before using Thank you for purchasing the Cobra Bluetooth® Over the Head Headset CBTH1. Your Cobra CBTH1 is a Bluetooth® wireless technology device that enables a cable free connection between your Bluetooth® wireless technology headset and Bluetooth® wireless technology enabled handset. 2. Package List Please inspect your packaging contents and refer to the package list below to confirm that there is no shortages or defects.
3. Product Illustration 1. Multi-Function Button (Answer/End/On/Off) 2. Volume Up (+) 3. Indicator Light 4. Voume Down (-) 5. Charging Jack Port 6. Speaker (Receiver) 7.
4. Charging the Headset CBTH1 includes a rechargeable built-in Lithium Polymer battery. IMPORTANT: For first time use, charge the headset for at least 4 hours before pairing. 1. Insert the USB charging cable into the charging jack port located at the bottom of the headset. 2. Plug other end of USB charging cable into the home charger. 3. Plug home charger into a working electrical wall outlet. 4. During charging the indicator will glow a steady red light 5.
3 seconds). 2. To power off, press and hold the multi-function button for 4+ seconds until you hear 3 beeps and you see the indicator flash red 3 times. 6. Pairing the Headset IMPORTANT: Your Cobra Bluetooth® headset and your Bluetooth® wireless technology enabled phone or other Bluetooth® wireless technology device, must be “paired” together before first time use. 1. Ensure the Headset is off (no flashing indicator light). 2.
press OK 9. If pairing is successful, your headset’s indicator will flash blue. If pairing is not successful, repeat the pairing process starting at step 1 11. Certain phone models may require you to press “connect” or “add to trusted devices” (See phone manual for specific Bluetooth® wireless technology pairing instructions) 10. Your headset is now paired and ready to use.
or right ear. 8. Answering Incoming Calls IMPORTANT: The working range of the Bluetooth® Wireless Headset is 16 feet indoors and 16 - 32 feet outdoors. 1. Wait for Headset to ring and then press the multi-function button to answer incoming call. NOTE: ● If Bluetooth® Wireless Headset is off, Bluetooth® wireless technology calls must be answer through handset. 9. Refusing Incoming Calls (For Handsfree profile phones) Press and hold multi-function button for 2-3 seconds until beep sound is heard.
12. Redialing 1. Press the multi-function button on the Headset for 2~3 seconds until you hear a beep sound to redial the last call. 13. Transferring Calls Between Headset and Handset 1. To transfer call to phone, press the volume increase (+) button for 2~3 seconds until you hear one beep sound, then the call will be transferred to your mobile phone. 2. To transfer call to Bluetooth® Headset, see your phone’s manual for special phones specific instructions.
NOTE: ● To activate this function, please refer to the instructions of your mobile phone manual to make sure your phone program supports this function. 16. 3 Way Conference Calling IMPORTANT: Your mobile phone and carrier must support this feature and/or it must be activated to work properly. 1. Press the volume decrease (-) button for 2~3 seconds until you hear one beep sound, then Call 1 will be placed on hold. The Headset automatically answer a second incoming call. 2.
17. Adjusting the Volume During a call, you may adjust the Headset’s volume. 1. To increase the volume, press the increase (+) volume key. 2. To decrease the volume, press the decrease (-) volume key. Note: ● You will hear a beep sound that corresponds to the adjusted volume level while adjusting the volume up or down. 18. Safety instruction 1. Read the Headset manual carefully and use the headset correctly by following the instructions. 2. Keep the Headset away from children. 3.
19. Specification Product Model No. CBTH1 Standard Convention/ Signal Output Bluetooth® V2.0 + EDR, Class II Frequency Band 2.4GHz ~ 2.4835GHz, ISM Band Talk/ Standby Time Up to 8 hours / Up to 250 hours Supporting Profile Headset & Handsfree Connection Peer to Peer Data Encryption 128 bits encrypted Power Capacity Rechargeable Li-Polymer Power Supply 5.
20. Trouble Shooting 1. Indicator light if flashing red. ● Battery is low, recharge headset. 2. No indicator light when charging. ● Leave headset on charger for a longer period of time because battery may be fully drained. 3. There’s NO sound coming from the Headset. ● Make sure the Headset is paired with Bluetooth® wireless technology device. ● Make sure the Headset is on. ● Make sure the distance between the Headset and the paired Bluetooth® wireless technology device is within 32 ft.
temperatures. - The travel charger is designed for indoor use. - Only authorized and qualified personnel can do battery changing. - Recharge the Headset at least once every two months, either you use it or not. - To extend battery life, consume all or most of battery charge before recharging. 22. Q & A Q : Why doesn’t my newly fully-charged Headset work with my Bluetooth® wireless technology mobile phone? A : You must complete the pairing process, see page 5.
Q : Why does my Bluetooth® wireless technology mobile phone find many Bluetooth® wireless technology devices while searching for the new Bluetooth® wireless technology device? A : Some mobile phones by default are set to find more than one Bluetooth® wireless technology device within the working range. When your phone is finished searching, your mobile phone’s LCD will show CBTH1 and/or some other Unknown Devices. Please select and confirm CBTH1.
phone has been exceeded. Please make sure the Headset and mobile phone are within the working range of 32 feet and there is no obvious interference between. Q : Why is the Headset suddenly not working? A : (1) The battery may be too low. (2) You may have a poor carrier/cellular signal (3) The connection between Headset and handset may have failed. Turn off and re-turn on both devices.
Directive 89/336/EEC. BQB Qualification: CBTH1 Bluetooth® Wireless Headset, a BQB Qualified Bluetooth® wireless technology product is listed as qualified End Product in accordance to section 6.2.4 of the PRD. Federal Communications Commission (FCC) Statement 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. 15.
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.
Limited Warranty FREE OF CHARGE WARRANTY SERVICE: 1. All defective units within the applicable Warranty period/s will be repaired or replaced, in the case those faulty goods were handled normally. 2. If you use device commercially, the warranty period will be reduced by half. FREE OF CHARGE WARRANTY DOES NOT APPLY TO: 1. Defects or damage resulting from use of the unit in other than its normal and intended manner, eg, in excess of their maximum specifications or operating instructions. 2.
19
