CWA BTH1 Plus User Manual ©2013 Cobra Electronics Corporation Part No.
Index 2. Introduction & Package List 3. Product Illustration 4. Charging the Headset 4. Power On/ Off 5. Pairing the Headset (or any Bluetooth® wireless device) 6. Wearing the Headset 6. Answering Incoming Calls 7. Refusing Incoming Calls 7. Ending Calls 7. Voice Dialing 7. Redialing Last Call 7. Transferring Calls Between Handset and Headset 8. Placing Calls On Hold 8. 3 Way Conference Calling 9. Adjusting the Volume 9. Safety Instruction 10. Specifications 11. Trouble Shooting 11. Headset Care 12.
1. Notice before using Thank you for purchasing the Cobra Bluetooth® Over the Head Headset CWA BTH1 Plus. Your Cobra CWA BTH1 Plus is a Bluetooth wireless technology device that enables a cable free connection between your Bluetooth wireless technology headset and Bluetooth Wireless Technology enabled cell phone. 2. Package List Please inspect your packaging contents and refer to the package list below to confirm that there is no shortages or defects.
. Charging the Headset CWA BTH1 Plus includes a rechargeable built-in Lithium Polymer battery. IMPORTANT: For first time use, charge the headset for at least 4 hours before pairing. 1. Insert the USB charging cable into the charging jack port located at the bottom of the headset. 2. Plug other end of USB charging cable into a PC or insert the USB cable into the cigarette adaptor and place into a working cigarette lighter outlet. 3. During charging the indicator will glow a steady red light 6.
NOTE: • Recommended distance between phone and headset during pairing is 1-3 feet • If headset is not successfully paired within 2 minutes, it will automatically abandon pairing mode and revert to standby • If phone is turned off OR removed from operating range of 32 ft., headset will automatically turn off after 10 minutes. 7. Wearing the Headset According to your preference, adjust the headset on your left or right ear. 8.
14. Placing Calls On Hold IMPORTANT: Your mobile phone and carrier must support this feature and/or it must be activated to work properly. 1. Press the volume decrease (-) button for 2~3 seconds until you hear one beep sound, then the call will be placed on hold. The headset automatically answers a second incoming call. 2. To take a call off hold, press the volume decrease (-) button for 2~3 seconds until you hear one beep sound.
19. Specification 20. Trouble Shooting 1. Indicator light if flashing red. • Battery is low, recharge headset. Product Model No. CWA BTH1 Plus Standard Convention/ Signal Output Bluetooth® V2.0 + EDR, Class II Frequency Band 2.4GHz ~ 2.4835GHz, ISM Band Talk/ Standby Time Up to 20 hours / Up to 400 hours • Make sure the headset is on. Supporting Profile Headset & Hands-free • Make sure the distance between the headset and the paired device is within 32 ft.
22. Q & A Q: Why doesn’t my newly fully-charged headset work with my Bluetooth wireless technology mobile phone? Q: Do I need to pair the headset every time I use it? A: No. The paired devices remain paired regardless of turning the power off on either device. A: You must complete the pairing process, see page 5.
23. Declaration of Conformity FCC (FCC ID: RL9-HCB86): CWA BTH1 Plus is FCC certificated as this device complies with part 15 of the FCC rules. European CE 0678: CWA BTH1 Plus has been manufactured in accordance with the European R& TTE directive. It complies with the European Low Voltage Directive 73/23/EEC and the European EMC Directive 89/336/EEC. BQB Qualification: Bluetooth Qualified Design ID: (QDID) B014163.
Limited Warranty NOTES WARRANTY SERVICE: All defective units within the warranty periods will be repaired or replaced. WARRANTY DOES NOT APPLY TO: 1. Damage resulting from use of the unit in other than it’s normal and intended manner. 2. Damage from misuse, accident, neglect, improper testing, installation, alteration, modification of any kind, and/or spillage of food or liquid. 3. Damage caused by natural disaster and/or the capacity of expendibles is exhausted.
